Hi Sparky users,
I use the testing release of Sparky Linux 8.
Since last update some days ago I have the problem, that I can not install some programs, they I used before.
After the updating procedere they are not available in the database.
For instance, these are some of for me important programs:
GIMP
xsane
k3b
For examle, when I try to install GIMP, I get the following messages (translated):
$ sudo apt install gimp
Package gimp is not available, but is supported by another package
referenced. This can mean that the package is missing, that it has been replaced
or is only available from another source.
Error: There is no installation candidate for package "gimp".
Some months ago I have had a similar problem. But, in this case the reason were not suitable sources - in my case for "unstable". At that time I could solve the problem by removing these sources.
But, now, I think, my sources are up to date. In last months my system works without any problems. Here are my current sources.
sources.list
deb http://deb.debian.org/debian/ trixie main contrib non-free non-free-firmware
deb-src http://deb.debian.org/debian/ trixie main contrib non-free non-free-firmware
deb http://security.debian.org/debian-security/ trixie-security/updates main contrib non-free non-free-firmware
deb-src http://security.debian.org/debian-security/ trixie-security/updates main contrib non-free non-free-firmware
deb http://deb.debian.org/debian/ trixie-updates main contrib non-free non-free-firmware
deb-src http://deb.debian.org/debian/ trixie-updates main contrib non-free non-free-firmware
deb http://deb-multimedia.org/ trixie main non-free
sparky.list
### sparky core repository is used by all sparky editions
deb [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ core main
deb-src [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ core main
### sparky sisters repository
deb [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ sisters main
deb-src [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ sisters main
Have you any idea to solve my problem?
Thank you in advance for your help.
Quote from: Splinx64 on November 23, 2024, 05:31:22 PM[....] I use the testing release of Sparky Linux 8.
Since last update some days ago I have the problem, that I can not install some programs, they I used before.
After the updating procedere they are not available in the database.
For instance, these are some of for me important programs:
GIMP
xsane
k3b
[....]
(https://i.imgur.com/IqZHXhe.gif) Apparently, the problem occurs for everyone who is using debian testing/trixie as well.
Then, last September, they were
removed from the repo (gimp & xsane) and aren't available:
(https://i.imgur.com/7HVZwpV.png)
See also:
And in the case of k3b, there is a significant dependency problem and it simply cannot be installed:
(https://i.imgur.com/eEc4eDu.png%5B/quote%5D%5Bquote%20author=Splinx64%20link=msg=18284%20date=1732379482%5DHave%20you%20any%20idea%20to%20solve%20my%20problem?%5B/quote%5DWell,%20I%20guess%20you%20must%20be%20patient%20and%20hope%20that%20the%20debian%20developers%20can%20solve%20those%20problems.%5Bquote%20author=Splinx64%20link=msg=18284%20date=1732379482%5DThank%20you%20in%20advance%20for%20your%20help.%5B/quote%5DYou'are%20welcome%20!!Cheers%20!! %20%5Bimg%5Dhttps://i.imgur.com/emjz0.gif)
I don't know why my previous message was published incomplete (... even when editing the message). (https://i.imgur.com/8tU9he6.gif)
So I'm going to continue here:
Quote from: Splinx64 on November 23, 2024, 05:31:22 PMHave you any idea to solve my problem?
Well, I guess you must be patient and hope that the debian developers can solve those problems.
Quote from: Splinx64 on November 23, 2024, 05:31:22 PMThank you in advance for your help.
You're welcome !!
Cheers !! (https://i.imgur.com/emjz0.gif)
Hello AxL,
thank you for your answers.
Oh, what for news. In this case I only can wait, until new versions of desired programs are developed or/and habe found the way in the testing release, isn'it?
Yes, of course, there are alternatives, them I can use to this moment.
Have a good sunday evening!
Quote from: Splinx64 on November 24, 2024, 06:06:02 PMHello AxL,
thank you for your answers.
You're welcome !!
Quote from: Splinx64 on November 24, 2024, 06:06:02 PM[....] Oh, what for news. In this case I only can wait, until new versions of desired programs are developed or/and habe found the way in the testing release, isn'it?
If you look at the links to the bug reports, in my first post. Specifically in these two messages:
- Message #10 (xsane - Fri, 22 Nov 2024')
- Message #24 (gimp - Mon, 21 Oct 2024')
You can see, that the patches for the possible fix, have already been added.
So, as I said at the beginning, we can only hope that they include them in the new version. To be able to correct/fix the problems that exist now.
OTOH, if you need a workaround, until this is fixed. You can use gimp as AppImage.
Cheers !! (https://i.imgur.com/emjz0.gif)
Thanks for your answer again.
Yes, using 'as Appimage' is an alternative solution to the time of fixing the problem.
But, I think, I will wait.
But nevertheless, thank you very much for the tips. Maybe, when I have enough time an the right feeling for this, I will see, what is to do.
Quote from: Splinx64 on November 25, 2024, 05:24:22 PMThanks for your answer again.
Yes, using 'as Appimage' is an alternative solution to the time of fixing the problem.
But, I think, I will wait.
But nevertheless, thank you very much for the tips. Maybe, when I have enough time an the right feeling for this, I will see, what is to do.
Glad to help. You're very welcome pal !! (https://i.imgur.com/TNbl9nw.gif)
Good news:
K3b is available again and installation of it worked.
Yeah! :)
Quote from: Splinx64 on November 26, 2024, 03:51:00 PMGood news:
K3b is available again and installation of it worked.
Yeah! :)
Well, I'm glad you were able to solve one of your problems. (https://i.imgur.com/qZur36x.gif)
After a lot of years using
SparkyLinux (testing/rolling). I am clear about two simple things. Always, have a good dose of
patience (to wait for the problem resolution).
And most importantly, have absolute trust in all
debian developers (in this particular case of
k3b,
Christian Marillat, from deb-multimedia aka
dmo). And of course, also
pavroo, as the lead developer of
SparkyLinux.
Cheers !! (https://i.imgbox.com/TkbBuT0I.gif)
My apologies, for adding this message in the wrong place. (https://i.imgur.com/uzufRWR.gif)
Hi Sparkies,
in the meantime, since I discribed my problem first time, a lot of weeks have passed.
Unfortunately, Gimp and some other applications, like 'xsane', are not yet available. So I help myself with using 'pixeleditor' and 'simple-scan'. Of course, they are not so comfortable like my preferred programs. But, what should I do?
In any case, I whish you a merry Christmas and a happy new year.
See/write you soon.
Hello all,
for a lot of weeks GIMP is available gain, but I still miss xsane.
Does anybody of you know more about to find a solution or alternative. In this time I use simple-scan, but, of course, it is not so comfortable like xsane.
Or, where can I find a road map of integrating all missing applications into testing?
Thank you for your help again.
Sincerely.
Quote from: Splinx64 on February 04, 2025, 11:11:20 AM[....]
Does anybody of you know more about to find a solution or alternative. In this time I use simple-scan, but, of course, it is not so comfortable like xsane.
(https://i.imgur.com/bDtcOwK.gif) Please, check out these links. Let's see if they work for you:
Quote from: Splinx64 on February 04, 2025, 11:11:20 AM[....]
Or, where can I find a road map of integrating all missing applications into testing?
See:
I forgot to comment in the previous message that both alternatives install a lot of KDE6-dependent crap. (https://i.imgur.com/uzufRWR.gif)
So, keep that in mind.
And, see also:
Well, it seems that there is finally good news. (https://i.imgur.com/4GCd6.gif)
There is a new version (> xsane 0.999-12.2) in sid, that fixes the long-standing issue:
Quote from: AxL on February 05, 2025, 04:50:37 PMQuote from: https://metadata.ftp-master.debian.org/changelogs/[/url]/main/x/xsane/xsane_0.999-12.2_changelogxsane 0.999-12.2 - Changelog"]
xsane (0.999-12.2) unstable; urgency=medium
* Non-maintainer upload.
* Apply patch from Jeremy Bícha to stop building and installing the gimp
plugin, as it's not compatible anymore with Gimp 3.0. Closes: #1088080
* Build-Depend on libjpeg-dev instead of a versioned libjpeg-turbo-dev.
Closes: #1089018
-- Mattia Rizzolo <mattia@debian.org> Mon, 03 Feb 2025 14:21:04 +0100
So, probably, in the next few days it will also be available in testing ....
Finally,
xsane is
/main/x/xsane/xsane_0.999-12.2_changelogxsane 0.999-12.2 - Changelog"]
xsane (0.999-12.2) unstable; urgency=medium * Non-maintainer upload.
* Apply patch from Jeremy Bícha to stop building and installing the gimp
plugin, as it's not compatible anymore with Gimp 3.0. Closes: #1088080
* Build-Depend on libjpeg-dev instead of a versioned libjpeg-turbo-dev.
Closes: #1089018
-- Mattia Rizzolo <mattia@debian.org> Mon, 03 Feb 2025 14:21:04 +0100
So, probably,
in the next few days it will also be available in testing ....
Finally,
xsane is [iurl=https://packages.debian.org/trixie/xsane]
NOW available in testingCheers !!
Hello Sparkies,
by now all missing packages are complete again, 'xsane' too.
In the meantime I've had some trouble between kernel 6.12... and nvidia drivers. So, I've had to use my last 6.11 kernel. But, this problem is also solved and my system works with kernel 6.12.12 and latest nvidia drivers. Unfortunately, in this moment I can't say, what version of nvidia drivers are installed.
Thank you all for help.
Have a nice weekend.
Best regards
AxL, I didn't see your post before.
Yes, 'xsane' works for a lot of days again.
Quote from: Splinx64 on February 28, 2025, 07:18:41 PM[....] Thank you all for help.
You're welcome !! (https://i.imgur.com/RGwcc9H.gif)