Advertising
Recent posts
#91
Hardware / Re: Sound card not detected
Last post by AxL - August 13, 2024, 12:16:42 AMQuote from: Tman on August 12, 2024, 10:18:48 PM[....]
I just installed firmware-sof-signed as advised and bravo, it immediately solved the problem :) !
I'm glad you were able to fix the problem ...
Quote from: Tman on August 12, 2024, 10:18:48 PM[....] So, THANK YOU VERY MUCH for your prompt and pertinent answer.
This is a pleasure to know that knowledge and competence is shared without restriction.
You're very welcome !!
Quote from: Tman on August 12, 2024, 10:21:41 PMBTW, how posting SOLVED ? As a newbie, I do not know yet the modus operandi.
You should edit your first message by clicking on the "More" label, located at the bottom right of your message.And choosing 'Modify' to change the title of the message by adding the [SOLVED] tag.
Cheers !!
#92
Hardware / Re: Sound card not detected
Last post by AxL - August 13, 2024, 12:02:59 AMQuote from: Tman on August 12, 2024, 07:39:52 PM[....]No problem.
Sorry for the duplication, I am new on this forum, that explains my mistake : how proceeding to delete the one post on "Newbie" ?
Just edit your duplicate message (by clicking on the "More" tab at the bottom right of your own message),
and ask @pavroo (Lead Developer & Forums Administrator) to delete it
Quote from: Tman on August 12, 2024, 07:39:52 PM[....] Thanks again,
#93
Hardware / Re: Sound card not detected
Last post by Tman - August 12, 2024, 10:21:41 PMBTW, how posting SOLVED ? As a newbie, I do not know yet the modus operandi.
Thank you.
Cheers,
Tman
Thank you.
Cheers,
Tman
#94
Hardware / Re: Sound card not detected
Last post by Tman - August 12, 2024, 10:18:48 PMHello again AxL,
I just installed firmware-sof-signed as advised and bravo, it immediately solved the problem :) !
So, THANK YOU VERY MUCH for your prompt and pertinent answer.
This is a pleasure to know that knowledge and competence is shared without restriction.
I will close now this ticket.
Thank you again.
Cheers,
Tman
I just installed firmware-sof-signed as advised and bravo, it immediately solved the problem :) !
So, THANK YOU VERY MUCH for your prompt and pertinent answer.
This is a pleasure to know that knowledge and competence is shared without restriction.
I will close now this ticket.
Thank you again.
Cheers,
Tman
#95
Hardware / Re: Sound card not detected
Last post by Tman - August 12, 2024, 07:39:52 PMHello AxL,
Thank you for your answer and yes, this is my settings.
I will read your 2 links and will give you the feedback.
Sorry for the duplication, I am new on this forum, that explains my mistake : how proceeding to delete the one post on "Newbie" ?
Thanks again,
Cheers,
Tman
Thank you for your answer and yes, this is my settings.
I will read your 2 links and will give you the feedback.
Sorry for the duplication, I am new on this forum, that explains my mistake : how proceeding to delete the one post on "Newbie" ?
Thanks again,
Cheers,
Tman
#96
Hardware / Re: Sound card not detected
Last post by AxL - August 12, 2024, 06:35:37 PMAnd please, don't duplicate the messages you post.
Since it only creates confusion, for other users ...
Since it only creates confusion, for other users ...
#97
Hardware / Re: Sound card not detected
Last post by AxL - August 12, 2024, 06:32:36 PMQuote from: Tman on August 12, 2024, 05:59:55 PM[....]
inxi -F tells me :
Audio:
Device-1: Intel Raptor Lake-P/U/H cAVS driver: sof-audio-pci-intel-tgl
API: ALSA v: k6.10.3-amd64 status: kernel-api
Do you already have this package firmware-sof-signed installed ...??See also:
#98
Hardware / Sound card not detected
Last post by Tman - August 12, 2024, 05:59:55 PMHello,
I just installed Sparky 8 Xfce and I am very satisfied with this promissing OS.
However, I encountered a strange problem : the sound card of my laptop is detected, see below, but, in the Settings of Audio mixer, I get a message, "no cards available for configuration" !
Therefore, I got no sound !
Yet, Inxi -F tells me :
Audio:
Device-1: Intel Raptor Lake-P/U/H cAVS driver: sof-audio-pci-intel-tgl
API: ALSA v: k6.10.3-amd64 status: kernel-api
What is the procedure to make my computer detecting the sound card ?
In the same laptop, I have another SSD with Mint 22 installed : the same sound card is properly detected and the sound works correctly.
Thank you for your help.
Cheers,
Tman
sparky@sparky:~$ sudo inxi -F
[sudo] Mot de passe de sparky : XXXXXXXXXXXXXXXXXX
System:
Host: sparky Kernel: 6.10.3-amd64 arch: x86_64 bits: 64
Desktop: Xfce v: 4.18.1 Distro: SparkyLinux 8 (Seven-Sisters)
Machine:
Type: Laptop System: LG product: 17Z90R-G.AA78F v: 0.1 serial: XXXXXXXXXXXXXXX
Mobo: LG model: 17Z90R v: FAB1
serial: XXXXXXXXXXXXXXXX17Z90R-G.AA78F UEFI: Phoenix
v: R1ZH0400 X64 date: 07/06/2023
Battery:
ID-1: BAT0 charge: 39.0 Wh (49.1%) condition: 79.4/80.0 Wh (99.3%)
volts: 7.7 min: 7.7
CPU:
Info: 12-core (4-mt/8-st) model: 13th Gen Intel Core i7-1360P bits: 64
type: MST AMCP cache: L2: 9 MiB
Speed (MHz): avg: 616 min/max: 400/5000:3700 cores: 1: 400 2: 3502 3: 400
4: 400 5: 400 6: 400 7: 400 8: 400 9: 400 10: 400 11: 400 12: 400 13: 762
14: 400 15: 400 16: 400
Graphics:
Device-1: Intel Raptor Lake-P [Iris Xe Graphics] driver: i915 v: kernel
Device-2: Luxvisions Innotech LGE Camera driver: uvcvideo type: USB
Display: x11 server: X.Org v: 21.1.11 driver: X: loaded: modesetting
unloaded: fbdev,vesa dri: iris gpu: i915 resolution: 2560x1600~60Hz
API: EGL v: 1.5 drivers: iris,swrast platforms: gbm,x11,surfaceless,device
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.1.3-2
renderer: Mesa Intel Graphics (RPL-P)
Audio:
Device-1: Intel Raptor Lake-P/U/H cAVS driver: sof-audio-pci-intel-tgl
API: ALSA v: k6.10.3-amd64 status: kernel-api
Network:
Device-1: Intel Raptor Lake PCH CNVi WiFi driver: iwlwifi
IF: wlan0 state: down mac: 12:fe:2a:c2:ea:6a
Device-2: ASIX AX88179 Gigabit Ethernet driver: cdc_ncm type: USB
IF: eth0 state: up speed: 1000 Mbps duplex: half mac: 08:26:ae:3a:ef:93
Bluetooth:
Device-1: Intel AX211 Bluetooth driver: btusb type: USB
Report: hciconfig ID: hci0 state: up address: C0:A5:E8:1F:3D:A2 bt-v: 5.3
Drives:
Local Storage: total: 1.84 TiB used: 11.1 GiB (0.6%)
ID-1: /dev/nvme0n1 vendor: SK Hynix model: HFS001TEJ9X101N
size: 953.87 GiB
ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 990 PRO 1TB size: 931.51 GiB
Partition:
ID-1: / size: 97.87 GiB used: 9.15 GiB (9.4%) fs: ext4 dev: /dev/nvme0n1p3
ID-2: /boot/efi size: 127 MiB used: 15.6 MiB (12.3%) fs: vfat
dev: /dev/nvme0n1p1
ID-3: /home size: 838.29 GiB used: 1.93 GiB (0.2%) fs: ext4
dev: /dev/nvme0n1p4
Swap:
ID-1: swap-1 type: partition size: 1024 MiB used: 0 KiB (0.0%)
dev: /dev/nvme0n1p2
Sensors:
System Temperatures: cpu: 39.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB note: est. available: 15.31 GiB used: 1.31 GiB (8.6%)
igpu: 60 MiB
Processes: 321 Uptime: 1m Shell: Sudo inxi: 3.3.35
I just installed Sparky 8 Xfce and I am very satisfied with this promissing OS.
However, I encountered a strange problem : the sound card of my laptop is detected, see below, but, in the Settings of Audio mixer, I get a message, "no cards available for configuration" !
Therefore, I got no sound !
Yet, Inxi -F tells me :
Audio:
Device-1: Intel Raptor Lake-P/U/H cAVS driver: sof-audio-pci-intel-tgl
API: ALSA v: k6.10.3-amd64 status: kernel-api
What is the procedure to make my computer detecting the sound card ?
In the same laptop, I have another SSD with Mint 22 installed : the same sound card is properly detected and the sound works correctly.
Thank you for your help.
Cheers,
Tman
sparky@sparky:~$ sudo inxi -F
[sudo] Mot de passe de sparky : XXXXXXXXXXXXXXXXXX
System:
Host: sparky Kernel: 6.10.3-amd64 arch: x86_64 bits: 64
Desktop: Xfce v: 4.18.1 Distro: SparkyLinux 8 (Seven-Sisters)
Machine:
Type: Laptop System: LG product: 17Z90R-G.AA78F v: 0.1 serial: XXXXXXXXXXXXXXX
Mobo: LG model: 17Z90R v: FAB1
serial: XXXXXXXXXXXXXXXX17Z90R-G.AA78F UEFI: Phoenix
v: R1ZH0400 X64 date: 07/06/2023
Battery:
ID-1: BAT0 charge: 39.0 Wh (49.1%) condition: 79.4/80.0 Wh (99.3%)
volts: 7.7 min: 7.7
CPU:
Info: 12-core (4-mt/8-st) model: 13th Gen Intel Core i7-1360P bits: 64
type: MST AMCP cache: L2: 9 MiB
Speed (MHz): avg: 616 min/max: 400/5000:3700 cores: 1: 400 2: 3502 3: 400
4: 400 5: 400 6: 400 7: 400 8: 400 9: 400 10: 400 11: 400 12: 400 13: 762
14: 400 15: 400 16: 400
Graphics:
Device-1: Intel Raptor Lake-P [Iris Xe Graphics] driver: i915 v: kernel
Device-2: Luxvisions Innotech LGE Camera driver: uvcvideo type: USB
Display: x11 server: X.Org v: 21.1.11 driver: X: loaded: modesetting
unloaded: fbdev,vesa dri: iris gpu: i915 resolution: 2560x1600~60Hz
API: EGL v: 1.5 drivers: iris,swrast platforms: gbm,x11,surfaceless,device
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.1.3-2
renderer: Mesa Intel Graphics (RPL-P)
Audio:
Device-1: Intel Raptor Lake-P/U/H cAVS driver: sof-audio-pci-intel-tgl
API: ALSA v: k6.10.3-amd64 status: kernel-api
Network:
Device-1: Intel Raptor Lake PCH CNVi WiFi driver: iwlwifi
IF: wlan0 state: down mac: 12:fe:2a:c2:ea:6a
Device-2: ASIX AX88179 Gigabit Ethernet driver: cdc_ncm type: USB
IF: eth0 state: up speed: 1000 Mbps duplex: half mac: 08:26:ae:3a:ef:93
Bluetooth:
Device-1: Intel AX211 Bluetooth driver: btusb type: USB
Report: hciconfig ID: hci0 state: up address: C0:A5:E8:1F:3D:A2 bt-v: 5.3
Drives:
Local Storage: total: 1.84 TiB used: 11.1 GiB (0.6%)
ID-1: /dev/nvme0n1 vendor: SK Hynix model: HFS001TEJ9X101N
size: 953.87 GiB
ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 990 PRO 1TB size: 931.51 GiB
Partition:
ID-1: / size: 97.87 GiB used: 9.15 GiB (9.4%) fs: ext4 dev: /dev/nvme0n1p3
ID-2: /boot/efi size: 127 MiB used: 15.6 MiB (12.3%) fs: vfat
dev: /dev/nvme0n1p1
ID-3: /home size: 838.29 GiB used: 1.93 GiB (0.2%) fs: ext4
dev: /dev/nvme0n1p4
Swap:
ID-1: swap-1 type: partition size: 1024 MiB used: 0 KiB (0.0%)
dev: /dev/nvme0n1p2
Sensors:
System Temperatures: cpu: 39.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB note: est. available: 15.31 GiB used: 1.31 GiB (8.6%)
igpu: 60 MiB
Processes: 321 Uptime: 1m Shell: Sudo inxi: 3.3.35
#99
Newbie questions / Sound card not detected
Last post by Tman - August 11, 2024, 06:28:11 PMHello,
I just installed Sparky 8 Xfce and I am very satisfied with this promissing OS.
However, I encountered a strange problem : the sound card of my laptop is detected, see below, but, in the Settings of Audio mixer, I get a message, "no cards available for configuration" !
Therefore, I got no sound !
Yet, Inxi -F tells me :
Audio:
Device-1: Intel Raptor Lake-P/U/H cAVS driver: sof-audio-pci-intel-tgl
API: ALSA v: k6.10.3-amd64 status: kernel-api
What is the procedure to make my computer detecting the sound card ?
In the same laptop, I have another SSD with Mint 22 installed : the same sound card is properly detected and the sound works correctly.
Thank you for your help.
Cheers,
Tman
sparky@sparky:~$ sudo inxi -F
[sudo] Mot de passe de sparky : XXXXXXXXXXXXXXXXXX
System:
Host: sparky Kernel: 6.10.3-amd64 arch: x86_64 bits: 64
Desktop: Xfce v: 4.18.1 Distro: SparkyLinux 8 (Seven-Sisters)
Machine:
Type: Laptop System: LG product: 17Z90R-G.AA78F v: 0.1 serial: XXXXXXXXXXXXXXX
Mobo: LG model: 17Z90R v: FAB1
serial: XXXXXXXXXXXXXXXX17Z90R-G.AA78F UEFI: Phoenix
v: R1ZH0400 X64 date: 07/06/2023
Battery:
ID-1: BAT0 charge: 39.0 Wh (49.1%) condition: 79.4/80.0 Wh (99.3%)
volts: 7.7 min: 7.7
CPU:
Info: 12-core (4-mt/8-st) model: 13th Gen Intel Core i7-1360P bits: 64
type: MST AMCP cache: L2: 9 MiB
Speed (MHz): avg: 616 min/max: 400/5000:3700 cores: 1: 400 2: 3502 3: 400
4: 400 5: 400 6: 400 7: 400 8: 400 9: 400 10: 400 11: 400 12: 400 13: 762
14: 400 15: 400 16: 400
Graphics:
Device-1: Intel Raptor Lake-P [Iris Xe Graphics] driver: i915 v: kernel
Device-2: Luxvisions Innotech LGE Camera driver: uvcvideo type: USB
Display: x11 server: X.Org v: 21.1.11 driver: X: loaded: modesetting
unloaded: fbdev,vesa dri: iris gpu: i915 resolution: 2560x1600~60Hz
API: EGL v: 1.5 drivers: iris,swrast platforms: gbm,x11,surfaceless,device
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.1.3-2
renderer: Mesa Intel Graphics (RPL-P)
Audio:
Device-1: Intel Raptor Lake-P/U/H cAVS driver: sof-audio-pci-intel-tgl
API: ALSA v: k6.10.3-amd64 status: kernel-api
Network:
Device-1: Intel Raptor Lake PCH CNVi WiFi driver: iwlwifi
IF: wlan0 state: down mac: 12:fe:2a:c2:ea:6a
Device-2: ASIX AX88179 Gigabit Ethernet driver: cdc_ncm type: USB
IF: eth0 state: up speed: 1000 Mbps duplex: half mac: 08:26:ae:3a:ef:93
Bluetooth:
Device-1: Intel AX211 Bluetooth driver: btusb type: USB
Report: hciconfig ID: hci0 state: up address: C0:A5:E8:1F:3D:A2 bt-v: 5.3
Drives:
Local Storage: total: 1.84 TiB used: 11.1 GiB (0.6%)
ID-1: /dev/nvme0n1 vendor: SK Hynix model: HFS001TEJ9X101N
size: 953.87 GiB
ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 990 PRO 1TB size: 931.51 GiB
Partition:
ID-1: / size: 97.87 GiB used: 9.15 GiB (9.4%) fs: ext4 dev: /dev/nvme0n1p3
ID-2: /boot/efi size: 127 MiB used: 15.6 MiB (12.3%) fs: vfat
dev: /dev/nvme0n1p1
ID-3: /home size: 838.29 GiB used: 1.93 GiB (0.2%) fs: ext4
dev: /dev/nvme0n1p4
Swap:
ID-1: swap-1 type: partition size: 1024 MiB used: 0 KiB (0.0%)
dev: /dev/nvme0n1p2
Sensors:
System Temperatures: cpu: 39.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB note: est. available: 15.31 GiB used: 1.31 GiB (8.6%)
igpu: 60 MiB
Processes: 321 Uptime: 1m Shell: Sudo inxi: 3.3.35
I just installed Sparky 8 Xfce and I am very satisfied with this promissing OS.
However, I encountered a strange problem : the sound card of my laptop is detected, see below, but, in the Settings of Audio mixer, I get a message, "no cards available for configuration" !
Therefore, I got no sound !
Yet, Inxi -F tells me :
Audio:
Device-1: Intel Raptor Lake-P/U/H cAVS driver: sof-audio-pci-intel-tgl
API: ALSA v: k6.10.3-amd64 status: kernel-api
What is the procedure to make my computer detecting the sound card ?
In the same laptop, I have another SSD with Mint 22 installed : the same sound card is properly detected and the sound works correctly.
Thank you for your help.
Cheers,
Tman
sparky@sparky:~$ sudo inxi -F
[sudo] Mot de passe de sparky : XXXXXXXXXXXXXXXXXX
System:
Host: sparky Kernel: 6.10.3-amd64 arch: x86_64 bits: 64
Desktop: Xfce v: 4.18.1 Distro: SparkyLinux 8 (Seven-Sisters)
Machine:
Type: Laptop System: LG product: 17Z90R-G.AA78F v: 0.1 serial: XXXXXXXXXXXXXXX
Mobo: LG model: 17Z90R v: FAB1
serial: XXXXXXXXXXXXXXXX17Z90R-G.AA78F UEFI: Phoenix
v: R1ZH0400 X64 date: 07/06/2023
Battery:
ID-1: BAT0 charge: 39.0 Wh (49.1%) condition: 79.4/80.0 Wh (99.3%)
volts: 7.7 min: 7.7
CPU:
Info: 12-core (4-mt/8-st) model: 13th Gen Intel Core i7-1360P bits: 64
type: MST AMCP cache: L2: 9 MiB
Speed (MHz): avg: 616 min/max: 400/5000:3700 cores: 1: 400 2: 3502 3: 400
4: 400 5: 400 6: 400 7: 400 8: 400 9: 400 10: 400 11: 400 12: 400 13: 762
14: 400 15: 400 16: 400
Graphics:
Device-1: Intel Raptor Lake-P [Iris Xe Graphics] driver: i915 v: kernel
Device-2: Luxvisions Innotech LGE Camera driver: uvcvideo type: USB
Display: x11 server: X.Org v: 21.1.11 driver: X: loaded: modesetting
unloaded: fbdev,vesa dri: iris gpu: i915 resolution: 2560x1600~60Hz
API: EGL v: 1.5 drivers: iris,swrast platforms: gbm,x11,surfaceless,device
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.1.3-2
renderer: Mesa Intel Graphics (RPL-P)
Audio:
Device-1: Intel Raptor Lake-P/U/H cAVS driver: sof-audio-pci-intel-tgl
API: ALSA v: k6.10.3-amd64 status: kernel-api
Network:
Device-1: Intel Raptor Lake PCH CNVi WiFi driver: iwlwifi
IF: wlan0 state: down mac: 12:fe:2a:c2:ea:6a
Device-2: ASIX AX88179 Gigabit Ethernet driver: cdc_ncm type: USB
IF: eth0 state: up speed: 1000 Mbps duplex: half mac: 08:26:ae:3a:ef:93
Bluetooth:
Device-1: Intel AX211 Bluetooth driver: btusb type: USB
Report: hciconfig ID: hci0 state: up address: C0:A5:E8:1F:3D:A2 bt-v: 5.3
Drives:
Local Storage: total: 1.84 TiB used: 11.1 GiB (0.6%)
ID-1: /dev/nvme0n1 vendor: SK Hynix model: HFS001TEJ9X101N
size: 953.87 GiB
ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 990 PRO 1TB size: 931.51 GiB
Partition:
ID-1: / size: 97.87 GiB used: 9.15 GiB (9.4%) fs: ext4 dev: /dev/nvme0n1p3
ID-2: /boot/efi size: 127 MiB used: 15.6 MiB (12.3%) fs: vfat
dev: /dev/nvme0n1p1
ID-3: /home size: 838.29 GiB used: 1.93 GiB (0.2%) fs: ext4
dev: /dev/nvme0n1p4
Swap:
ID-1: swap-1 type: partition size: 1024 MiB used: 0 KiB (0.0%)
dev: /dev/nvme0n1p2
Sensors:
System Temperatures: cpu: 39.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB note: est. available: 15.31 GiB used: 1.31 GiB (8.6%)
igpu: 60 MiB
Processes: 321 Uptime: 1m Shell: Sudo inxi: 3.3.35
#100
Newbie questions / brightness and backlight
Last post by polten77 - August 10, 2024, 05:11:20 PMI have two questions.
Why you can change the brightness but not the backlight.
How do I fix the resetting of the brightness settings when I reboot?
thanks for your help
Why you can change the brightness but not the backlight.
How do I fix the resetting of the brightness settings when I reboot?
thanks for your help