Advertising

Welcome to SparkyLinux forums
Zapraszamy również na polsko-języczne Forum https://forum.linuxiarze.pl

No login password [SOLVED]

Started by Crippled, August 23, 2019, 06:42:41 PM

Previous topic - Next topic

Crippled

I have been trying to figure out since installing SparkyLinux 5.8 yesturday to how to have it ask me for a lognin password. I never selected any auto login when I installed SparkyLinux. How do I get SparkyLinux 5.8 to require a password apon bootup?                      inxi -F
System:
  Host: mauser-pc Kernel: 4.19.0-5-amd64 x86_64 bits: 64
  Desktop: Xfce 4.12.4 Distro: SparkyLinux 5.8 (Nibiru)
Machine:
  Type: Desktop Mobo: ASUSTeK model: TUF X470-PLUS GAMING v: Rev X.0x
  serial: <root required> UEFI: American Megatrends v: 4207 date: 12/08/2018
CPU:
  Topology: 8-Core model: AMD Ryzen 7 1700 bits: 64 type: MT MCP
  L2 cache: 4096 KiB
  Speed: 1545 MHz min/max: 1550/3000 MHz Core speeds (MHz): 1: 1542 2: 1538
  3: 1557 4: 1546 5: 1552 6: 1545 7: 1546 8: 1553 9: 1551 10: 1552 11: 1551
  12: 1547 13: 1545 14: 1543 15: 1550 16: 1547
Graphics:
  Device-1: AMD Cedar [Radeon HD 5000/6000/7350/8350 Series] driver: radeon
  v: kernel
  Display: x11 server: X.Org 1.20.4 driver: ati,radeon
  unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
  OpenGL: renderer: AMD CEDAR (DRM 2.50.0 / 4.19.0-5-amd64 LLVM 7.0.1)
  v: 3.3 Mesa 18.3.6
Audio:
  Device-1: AMD Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series]
  driver: snd_hda_intel
  Device-2: AMD Family 17h HD Audio driver: snd_hda_intel
  Sound Server: ALSA v: k4.19.0-5-amd64
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
  driver: r8169
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: 0c:9d:92:11:18:9b
  IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
Drives:
  Local Storage: total: 3.64 TiB used: 1.31 TiB (36.1%)
  ID-1: /dev/sda vendor: Marvell model: Raid VD size: 3.64 TiB
Partition:
  ID-1: / size: 3.56 TiB used: 1.31 TiB (36.9%) fs: ext4 dev: /dev/sda2
  ID-2: swap-1 size: 25.89 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda3
Sensors:
  System Temperatures: cpu: 29.2 C mobo: N/A gpu: radeon temp: 44 C
  Fan Speeds (RPM): cpu: 0
Info:
  Processes: 279 Uptime: 10m Memory: 23.54 GiB used: 1.26 GiB (5.4%)
  Shell: bash inxi: 3.0.32
I am command line illiterate. I am a copy and paste terminal user.

21grams

Have a look in /etc/lightdm/lightdm.conf under [Seat;*] for autologin-user=

If it is uncommented (missing the #) then that is what the installer has set. - If you have already set a password, you might be safe to comment that line again to ignore autologin.

NOTE: I'm not sure the implications of commenting it out. Will that be another issue with no password set though? backup, backup ...
21grams >> light in flight

Crippled

#2
Quote from: 21grams on August 24, 2019, 04:37:29 AM
Have a look in /etc/lightdm/lightdm.conf under [Seat;*] for autologin-user=

If it is uncommented (missing the #) then that is what the installer has set. - If you have already set a password, you might be safe to comment that line again to ignore autologin.

NOTE: I'm not sure the implications of commenting it out. Will that be another issue with no password set though? backup, backup ...
I set a password. I got to that file but I don't understand it.  :-\ [Seat:*]
#
# General configuration
#
# start-default-seat = True to always start one seat if none are defined in the configuration
# greeter-user = User to run greeter as
# minimum-display-number = Minimum display number to use for X servers
# minimum-vt = First VT to run displays on
# lock-memory = True to prevent memory from being paged to disk
# user-authority-in-system-dir = True if session authority should be in the system location
# guest-account-script = Script to be run to setup guest account
# logind-check-graphical = True to on start seats that are marked as graphical by logind
# log-directory = Directory to log information to
# run-directory = Directory to put running state in
# cache-directory = Directory to cache to
# sessions-directory = Directory to find sessions
# remote-sessions-directory = Directory to find remote sessions
# greeters-directory = Directory to find greeters
# backup-logs = True to move add a .old suffix to old log files when opening new ones
# dbus-service = True if LightDM provides a D-Bus service to control it
#
[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
#minimum-vt=7
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
#logind-check-graphical=false
#log-directory=/var/log/lightdm
#run-directory=/var/run/lightdm
#cache-directory=/var/cache/lightdm
#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#greeters-directory=$XDG_DATA_DIRS/lightdm/greeters:$XDG_DATA_DIRS/xgreeters
#backup-logs=true
#dbus-service=true

#
# Seat configuration
#
# Seat configuration is matched against the seat name glob in the section, for example:
# [Seat:*] matches all seats and is applied first.
# [Seat:seat0] matches the seat named "seat0".
# [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client".
#
# type = Seat type (local, xremote, unity)
# pam-service = PAM service to use for login
# pam-autologin-service = PAM service to use for autologin
# pam-greeter-service = PAM service to use for greeters
# xserver-backend = X backend to use (mir)
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
# xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option)
# xserver-config = Config file to pass to X server
# xserver-layout = Layout to pass to X server
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
# xserver-share = True if the X server is shared for both greeter and session
# xserver-hostname = Hostname of X server (only for type=xremote)
# xserver-display-number = Display number of X server (only for type=xremote)
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
# xdmcp-port = XDMCP UDP/IP port to communicate on
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
# unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option)
# unity-compositor-timeout = Number of seconds to wait for compositor to start
# greeter-session = Session to load for greeter
# greeter-hide-users = True to hide the user list
# greeter-allow-guest = True if the greeter should show a guest login option
# greeter-show-manual-login = True if the greeter should offer a manual login option
# greeter-show-remote-login = True if the greeter should offer a remote login option
# user-session = Session to load for users
# allow-user-switching = True if allowed to switch users
# allow-guest = True if guest login is allowed
# guest-session = Session to load for guests (overrides user-session)
# session-wrapper = Wrapper script to run session with
# greeter-wrapper = Wrapper script to run greeter with
# guest-wrapper = Wrapper script to run guest sessions with
# display-setup-script = Script to run when starting a greeter session (runs as root)
# display-stopped-script = Script to run after stopping the display server (runs as root)
# greeter-setup-script = Script to run when starting a greeter (runs as root)
# session-setup-script = Script to run when starting a user session (runs as root)
# session-cleanup-script = Script to run when quitting a user session (runs as root)
# autologin-guest = True to log in as guest by default
# autologin-user = User to log in with by default (overrides autologin-guest)
# autologin-user-timeout = Number of seconds to wait before loading default user
# autologin-session = Session to load for automatic login (overrides user-session)
# autologin-in-background = True if autologin session should not be immediately activated
# exit-on-failure = True if the daemon should exit if this seat fails
#
[Seat:*]
#type=local
#pam-service=lightdm
#pam-autologin-service=lightdm-autologin
#pam-greeter-service=lightdm-greeter
#xserver-backend=
#xserver-command=X
#xmir-command=Xmir
#xserver-config=
#xserver-layout=
#xserver-allow-tcp=false
#xserver-share=true
#xserver-hostname=
#xserver-display-number=
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
#unity-compositor-command=unity-system-compositor
#unity-compositor-timeout=60
greeter-session=lightdm-greeter
#greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
user-session=xfce
#allow-user-switching=true
#allow-guest=true
#guest-session=
#session-wrapper=lightdm-session
#greeter-wrapper=
#guest-wrapper=
#display-setup-script=
#display-stopped-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
autologin-user=mauser
#autologin-user-timeout=0
#autologin-in-background=false
#autologin-session=
#exit-on-failure=false

#
# XDMCP Server configuration
#
# enabled = True if XDMCP connections should be allowed
# port = UDP/IP port to listen for connections on
# listen-address = Host/address to listen for XDMCP connections (use all addresses if not present)
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
# hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset)
#
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn.  Alternatively
# it can be a word and the first 7 characters are used as the key.
#
[XDMCPServer]
#enabled=false
#port=177
#listen-address=
#key=
#hostname=

#
# VNC Server configuration
#
# enabled = True if VNC connections should be allowed
# command = Command to run Xvnc server with
# port = TCP/IP port to listen for connections on
# listen-address = Host/address to listen for VNC connections (use all addresses if not present)
# width = Width of display to use
# height = Height of display to use
# depth = Color depth of display to use
#
[VNCServer]
#enabled=false
#command=Xvnc
#port=5900
#listen-address=
#width=1024
#height=768
#depth=8
Does anything needs to be changed and if so, what needs to be changed to what?  :-\
I am command line illiterate. I am a copy and paste terminal user.

21grams

#display-stopped-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
autologin-user=mauser
#autologin-user-timeout=0
#autologin-in-background=false
#autologin-session=
#exit-on-failure=false

#
# XDMCP Server configuration


look for this line: autologin-user=mauser. you will see it has no # in the front of it. Putting # in front will cancel out the autologin.

hth.
21grams >> light in flight

Crippled

Quote from: 21grams on August 24, 2019, 05:46:23 AM
#display-stopped-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
autologin-user=mauser
#autologin-user-timeout=0
#autologin-in-background=false
#autologin-session=
#exit-on-failure=false

#
# XDMCP Server configuration


look for this line: autologin-user=mauser. you will see it has no # in the front of it. Putting # in front will cancel out the autologin.

hth.
Linux is fighting me again. When I change that entry and save it and rebooted and it still didn't ask for my passdword. I rechecked the entry that I saved and it didn't save it. I did it as root so I don't understand why it didn't save. That information opens in LibreOffice if that makes a difference. When I edit it how do I get it to stay edited to what it's supose to be?
I am command line illiterate. I am a copy and paste terminal user.

Crippled

I figured out how to get it to save the changes. I used Mousepad instead of LibreOffice which it was using as defualt. Thank you very much for your help 21grams.  :)
I am command line illiterate. I am a copy and paste terminal user.

View the most recent posts on the forum