Network problem: connected SD Cards do not apear anymore (in Gparted)

[BaukeP]

Hello,
I'm using Sparky XFCE testing and I suddenly (after update?) lost my SD Cards after inserting. In Debian testing there are no problems. Any idea?

Regards, Bauke

[lami07]

What exactly did you mean by saying

I suddenly (after update?) lost my SD Cards after inserting.

[BaukeP]

Well, I still have my SD Card, but after inserting in my (buildin) cardreader it doesn't show op in Gparted or DoubleCommander. When I reboot in Debian testing it does show after inserting.

[lami07]

Ok. Show me inxi -Fxx and lspci.

[BaukeP]

Edit: Was the output on Debian testing

[BaukeP]

I'm very sorry, but that was the output from Debian testing.
Here comes the same from sparky:

Code: [Select]

┌── bauke@xps-sparky-xfce di 2020-11-17 12:51
└─> [~] $ inxi -Fxx; lspci
System:    Host: xps-sparky-xfce Kernel: 5.9.8-sparky-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.0 Desktop: Xfce 4.14.3
           tk: Gtk 3.24.23 wm: xfwm4 dm: LightDM Distro: SparkyLinux 6 (Po-Tolo) base: Debian bullseye/sid
Machine:   Type: Laptop System: Dell product: XPS 15 9550 v: N/A serial: <superuser/root required> Chassis: type: 9
           serial: <superuser/root required>
           Mobo: Dell model: 0N7TVV v: A01 serial: <superuser/root required> UEFI [Legacy]: Dell v: 1.14.0 date: 02/13/2020
Battery:   ID-1: BAT0 charge: 39.9 Wh condition: 39.9/84.0 Wh (47%) volts: 12.4/11.4 model: SMP DELL 1P6KD5A serial: 432
           status: Full
CPU:       Info: Quad Core model: Intel Core i7-6700HQ bits: 64 type: MT MCP arch: Skylake-S rev: 3 L2 cache: 6144 KiB
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 41599
           Speed: 959 MHz min/max: 800/3500 MHz Core speeds (MHz): 1: 1505 2: 1719 3: 1628 4: 1514 5: 1497 6: 1529 7: 1583
           8: 1464
Graphics:  Device-1: Intel HD Graphics 530 vendor: Dell XPS 15 9550 driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:191b
           Device-2: NVIDIA GM107M [GeForce GTX 960M] vendor: Dell XPS 15 9550 driver: nouveau v: kernel bus ID: 01:00.0
           chip ID: 10de:139b
           Device-3: Microdia Integrated_Webcam_HD type: USB driver: uvcvideo bus ID: 1-12:5 chip ID: 0c45:6713
           Display: x11 server: X.Org 1.20.8 driver: modesetting unloaded: fbdev,vesa resolution: 2560x1440~60Hz s-dpi: 96
           OpenGL: renderer: Mesa Intel HD Graphics 530 (SKL GT2) v: 4.6 Mesa 20.1.9 direct render: Yes
Audio:     Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: Dell XPS 15 9550 driver: snd_hda_intel v: kernel
           bus ID: 00:1f.3 chip ID: 8086:a170
           Sound Server: ALSA v: k5.9.8-sparky-amd64
Network:   Device-1: Broadcom BCM43602 802.11ac Wireless LAN SoC vendor: Dell driver: brcmfmac v: kernel port: e000
           bus ID: 02:00.0 chip ID: 14e4:43ba
           IF: wlan0 state: up mac: 44:1c:a8:e2:28:73
           Device-2: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 bus ID: 4-1.2:4 chip ID: 0bda:8153
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:e0:4c:68:00:b9
Drives:    Local Storage: total: 13.20 TiB used: 4.09 TiB (31.0%)
           ID-1: /dev/nvme0n1 vendor: Samsung model: PM951 NVMe 512GB size: 476.94 GiB speed: 31.6 Gb/s lanes: 4
           serial: S29PNX0H503179
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic DISK00 size: 2.73 TiB serial: 0123456789ABCDEF
           ID-3: /dev/sdb type: USB vendor: JMicron Tech model: Generic DISK01 size: 2.73 TiB serial: 0123456789ABCDEF
           ID-4: /dev/sdc type: USB vendor: Western Digital model: WD Elements SE 25FF size: 3.64 TiB
           serial: 5758383144383837504C324C
           ID-5: /dev/sdd type: USB vendor: Western Digital model: WD Elements SE 25FF size: 3.64 TiB
           serial: 575839314436384C41393533
Partition: ID-1: / size: 24.48 GiB used: 14.60 GiB (59.6%) fs: ext4 dev: /dev/nvme0n1p2
Swap:      ID-1: swap-1 type: file size: 2.00 GiB used: 0 KiB (0.0%) priority: -2 file: /mnt/Data/swapfile
Sensors:   System Temperatures: cpu: 62.0 C mobo: N/A gpu: nouveau temp: 40.0 C
           Fan Speeds (RPM): cpu: 2493 fan-2: 2501
Info:      Processes: 307 Uptime: 2m Memory: 15.40 GiB used: 3.43 GiB (22.2%) Init: systemd v: 246 runlevel: 5
           target: graphical.target Compilers: gcc: 10.2.0 alt: 10/9 Packages: apt: 2565 Shell: Bash v: 5.1.0-rc2
           running in: terminator inxi: 3.1.09

           
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation 6th-9th Gen Core Processor PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 07)
00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)
00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)
00:15.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #0 (rev 31)
00:15.1 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #1 (rev 31)
00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
00:17.0 SATA controller: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1)
00:1c.1 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #2 (rev f1)
00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1)
00:1d.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #13 (rev f1)
00:1d.6 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #15 (rev f1)
00:1f.0 ISA bridge: Intel Corporation HM170 Chipset LPC/eSPI Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)
00:1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31)
00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)
02:00.0 Network controller: Broadcom Inc. and subsidiaries BCM43602 802.11ac Wireless LAN SoC (rev 01)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)
04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM951/PM951 (rev 01)
06:00.0 PCI bridge: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015]
07:00.0 PCI bridge: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015]
07:01.0 PCI bridge: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015]
07:02.0 PCI bridge: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015]
3e:00.0 USB controller: Intel Corporation DSL6340 USB 3.1 Controller [Alpine Ridge]


[lami07]

Ok. Since we know that your SD card reader is :

Code: [Select]

03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)we can start digging. I guess it would be good start point to compere ''rts'' kernel modules loaded on both systems

Code: [Select]

sudo lsmod | grep rts

[BaukeP]

In debian thre is output; in sparky not

Code: [Select]

sudo lsmod | grep rts

┌── bauke@xps-deb11-xfce wo 2020-11-18 14:22
└─> [~] $ sudo lsmod | grep rts
[sudo] password for bauke:
rtsx_pci_sdmmc         32768  0
mmc_core              184320  3 rtsx_pci_sdmmc,mmc_block,brcmfmac
rtsx_pci               90112  1 rtsx_pci_sdmmc
mfd_core               20480  2 rtsx_pci,intel_lpss

┌── bauke@xps-sparky-xfce wo 2020-11-18 14:30
└─> [~] $ sudo lsmod | grep rts
[sudo] password for bauke:

┌── bauke@xps-sparky-xfce wo 2020-11-18 14:30
└─> [~] $

[pavroo]

The module is missing it Sparky kernel.
It'll be fixed in a next build, thanks.

[BaukeP]

Oké, thanks

Bauke