Welcome to SparkyLinux forumsZapraszamy również na polsko-języczne Forum https://forum.linuxiarze.pl
Started by juanprf, January 26, 2019, 07:38:26 PM
systemctl status NetworkManager
sudo systemctl enable NetworkManagersudo systemctl start NetworkManager
paxmark@raunesat:~$ lspci ...01:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)03:00.0 Ethernet controller: Qualcomm Atheros AR8132 Fast Ethernet (rev c0)
Quote from: Bluewater on January 26, 2019, 10:02:36 PMIs the NetworkManager active?Code Select Expandsystemctl status NetworkManagerIf not start withCode Select Expandsudo systemctl enable NetworkManagersudo systemctl start NetworkManager
Quote from: paxmark1 on January 26, 2019, 11:35:49 PM1.Study 2. Isolate - eliminate Lots of info on web and probably first search this forum.Did the systemctl commands work. If so mark the subject above as solved.Still does not work - If it is possible - attach ethernet cable and continue with that until solved.I use the terminal. If you can't - others can help.partial lspci output - marked up as code via the # button above.Code Select Expandpaxmark@raunesat:~$ lspci ...01:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)03:00.0 Ethernet controller: Qualcomm Atheros AR8132 Fast Ethernet (rev c0)post your output. research the chipset (above is Atheros AR9285 - yours will probably be different. Probably not - but If you have something like AWUS036ACH USB 3.0 Wi-Fi Adapter == rtl8812AU_8821AU - it is a bit of work. I can help with that.
00:14.3 Network controller: Intel Corporation Device a370 (rev 10)03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 P
QuoteIntel [8086:a370] (rev 10)The Google says that's a new Jefferson Peak Intel 9560 wi-fi adapter like the one in my new laptop I'm using right now:00:14.3 Network controller: Intel Corporation Wireless-AC 9560 [Jefferson Peak] (rev 10)So if you're trying to work around that not working by using the Realtek USB adapter, I think the rest of the machine is also bleeding edge hardware, and you're going to run into a LOT of issues trying to using an antique 3.16 kernel and drivers on brand-new bleeding-edge hardware. If you don't have any Net connection so you could install hardware ID tools like inxi, could you at least tell us the model and date of your machine, along with whatever hardware info you have? My thoughts are that you will probably need Helium along with the newest kernel, mesa stack, and firmware you can get, depending on your GPU.FWIW, Debian's non-free firmware packages are sadly aging, and even the upstream versions lack the firmware for the 9560. I had to get it from the kernel repo and put it into lib/firmware/iwlwifi.
View the most recent posts on the forum