Advertising

Welcome to SparkyLinux forums
Zapraszamy również na polsko-języczne Forum https://forum.linuxiarze.pl

I just installed Sparky Linux Gameover Edition and only my wifi works, RJ45 dont

Started by vectoravtech, June 05, 2016, 08:28:36 AM

Previous topic - Next topic

vectoravtech

I'm on a Lenovo G780 laptop and I want to get my cable working so I dont have to game on wifi. How can I fix this? Thankyou in advance and I'm very excited. This distro is amazing! :D

The non working cable seems to be a problem in most distros I try.

paxmark1

Search forum for "More info easier via inxi"    If requested -  no inxi, no help for you by  me.

vectoravtech


pavroo

Probably your device works on rtl8150 chipset, but show an output:
lspci -v
dmesg

Nothing is easy as it looks. Danielle Steel
Join #sparkylinux.org at irc.libera.chat

vectoravtech

By the way now I'm using KDE Sparky with the same problem.

@sparky:~$ lspci -v
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
        Subsystem: Lenovo 3rd Gen Core processor DRAM Controller
        Flags: bus master, fast devsel, latency 0
        Capabilities: <access denied>
        Kernel driver in use: ivb_uncore

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
        Subsystem: Lenovo 3rd Gen Core processor Graphics Controller
        Flags: bus master, fast devsel, latency 0, IRQ 27
        Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
        Memory at c0000000 (64-bit, prefetchable) [size=256M]
        I/O ports at 3000 [size=64]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915
        Kernel modules: i915

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
        Subsystem: Lenovo 7 Series/C210 Series Chipset Family USB xHCI Host Controller
        Flags: bus master, medium devsel, latency 0, IRQ 26
        Memory at d0600000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
        Subsystem: Lenovo 7 Series/C210 Series Chipset Family MEI Controller
        Flags: bus master, fast devsel, latency 0, IRQ 29
        Memory at d0614000 (64-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
        Subsystem: Lenovo 7 Series/C210 Series Chipset Family USB Enhanced Host Controller
        Flags: bus master, medium devsel, latency 0, IRQ 16
        Memory at d0619000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
        Subsystem: Lenovo 7 Series/C210 Series Chipset Family High Definition Audio Controller
        Flags: bus master, fast devsel, latency 0, IRQ 30
        Memory at d0610000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: d0500000-d05fffff
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: d0400000-d04fffff
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
        Subsystem: Lenovo 7 Series/C210 Series Chipset Family USB Enhanced Host Controller
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at d0618000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
        Subsystem: Lenovo HM76 Express Chipset LPC Controller
        Flags: bus master, medium devsel, latency 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
        Subsystem: Lenovo 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 28
        I/O ports at 3088 [size=8]
        I/O ports at 3094
        I/O ports at 3080 [size=8]
        I/O ports at 3090
        I/O ports at 3060 [size=32]
        Memory at d0617000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci
        Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
        Subsystem: Lenovo 7 Series/C210 Series Chipset Family SMBus Controller
        Flags: medium devsel, IRQ 19
        Memory at d0615000 (64-bit, non-prefetchable) [size=256]
        I/O ports at 3040 [size=32]
        Kernel modules: i2c_i801

01:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 08)
        Subsystem: Lenovo AR8162 Fast Ethernet
        Flags: bus master, fast devsel, latency 0, IRQ 31
        Memory at d0500000 (64-bit, non-prefetchable) [size=256K]
        I/O ports at 2000 [size=128]
        Capabilities: <access denied>
        Kernel driver in use: alx
        Kernel modules: alx

02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
        Subsystem: Lenovo AR9285 Wireless Network Adapter (PCI-Express)
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at d0400000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: ath9k
        Kernel modules: ath9k

pavroo

Did you connect your rj45 device before running the lspci command?
What about the second one: dmesg
If your device is connected via an USB port, show one more:
lsusb
Nothing is easy as it looks. Danielle Steel
Join #sparkylinux.org at irc.libera.chat

vectoravtech

Seperated commands this time (I made sure the RJ45 was plugged in also) //

lspci -v
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
        Subsystem: Lenovo 3rd Gen Core processor DRAM Controller
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>
        Kernel driver in use: ivb_uncore

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
        Subsystem: Lenovo 3rd Gen Core processor Graphics Controller
        Flags: bus master, fast devsel, latency 0, IRQ 28
        Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
        Memory at c0000000 (64-bit, prefetchable) [size=256M]
        I/O ports at 3000 [size=64]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [d0] Power Management version 2
        Capabilities: [a4] PCI Advanced Features
        Kernel driver in use: i915
        Kernel modules: i915

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
        Subsystem: Lenovo 7 Series/C210 Series Chipset Family USB xHCI Host Controller
        Flags: bus master, medium devsel, latency 0, IRQ 26
        Memory at d0600000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [70] Power Management version 2
        Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
        Subsystem: Lenovo 7 Series/C210 Series Chipset Family MEI Controller
        Flags: bus master, fast devsel, latency 0, IRQ 29
        Memory at d0614000 (64-bit, non-prefetchable) [size=16]
        Capabilities: [50] Power Management version 3                                                                                                                                                                           
        Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+                                                                                                                                                               
        Kernel driver in use: mei_me                                                                                                                                                                                             
        Kernel modules: mei_me                                                                                                                                                                                                   
                                                                                                                                                                                                                                 
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])                                                                                       
        Subsystem: Lenovo 7 Series/C210 Series Chipset Family USB Enhanced Host Controller                                                                                                                                       
        Flags: bus master, medium devsel, latency 0, IRQ 16                                                                                                                                                                     
        Memory at d0619000 (32-bit, non-prefetchable) [size=1K]                                                                                                                                                                 
        Capabilities: [50] Power Management version 2                                                                                                                                                                           
        Capabilities: [58] Debug port: BAR=1 offset=00a0                                                                                                                                                                         
        Capabilities: [98] PCI Advanced Features                                                                                                                                                                                 
        Kernel driver in use: ehci-pci                                                                                                                                                                                           
        Kernel modules: ehci_pci                                                                                                                                                                                                 
                                                                                                                                                                                                                                 
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)                                                                                                           
        Subsystem: Lenovo 7 Series/C210 Series Chipset Family High Definition Audio Controller                                                                                                                                   
        Flags: bus master, fast devsel, latency 0, IRQ 30                                                                                                                                                                       
        Memory at d0610000 (64-bit, non-prefetchable) [size=16K]                                                                                                                                                                 
        Capabilities: [50] Power Management version 2                                                                                                                                                                           
        Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+                                                                                                                                                               
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00                                                                                                                                                     
        Capabilities: [100] Virtual Channel                                                                                                                                                                                     
        Capabilities: [130] Root Complex Link                                                                                                                                                                                   
        Kernel driver in use: snd_hda_intel                                                                                                                                                                                     
        Kernel modules: snd_hda_intel                                                                                                                                                                                           
                                                                                                                                                                                                                                 
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])                                                                                         
        Flags: bus master, fast devsel, latency 0, IRQ 17                                                                                                                                                                       
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0                                                                                                                                                             
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: d0500000-d05fffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Lenovo 7 Series/C210 Series Chipset Family PCI Express Root Port 1
        Capabilities: [a0] Power Management version 2
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: d0400000-d04fffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Lenovo 7 Series/C210 Series Chipset Family PCI Express Root Port 2
        Capabilities: [a0] Power Management version 2
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
        Subsystem: Lenovo 7 Series/C210 Series Chipset Family USB Enhanced Host Controller
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at d0618000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
        Subsystem: Lenovo HM76 Express Chipset LPC Controller
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
        Subsystem: Lenovo 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 27
        I/O ports at 3088 [size=8]
        I/O ports at 3094
        I/O ports at 3080 [size=8]
        I/O ports at 3090
        I/O ports at 3060 [size=32]
        Memory at d0617000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [70] Power Management version 3
        Capabilities: [a8] SATA HBA v1.0
        Capabilities: [b0] PCI Advanced Features
        Kernel driver in use: ahci
        Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
        Subsystem: Lenovo 7 Series/C210 Series Chipset Family SMBus Controller
        Flags: medium devsel, IRQ 19
        Memory at d0615000 (64-bit, non-prefetchable) [size=256]
        I/O ports at 3040 [size=32]
        Kernel modules: i2c_i801

01:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 08)
        Subsystem: Lenovo AR8162 Fast Ethernet
        Flags: bus master, fast devsel, latency 0, IRQ 31
        Memory at d0500000 (64-bit, non-prefetchable) [size=256K]
        I/O ports at 2000 [size=128]
        Capabilities: [40] Power Management version 3
        Capabilities: [58] Express Endpoint, MSI 00
        Capabilities: [c0] MSI: Enable+ Count=1/16 Maskable+ 64bit+
        Capabilities: [d8] MSI-X: Enable- Count=16 Masked-
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [180] Device Serial Number ff-fa-54-d8-dc-0e-a1-ff
        Kernel driver in use: alx
        Kernel modules: alx

02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
        Subsystem: Lenovo AR9285 Wireless Network Adapter (PCI-Express)
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at d0400000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [60] Express Legacy Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Virtual Channel
        Capabilities: [160] Device Serial Number 00-15-17-ff-ff-24-14-12
        Capabilities: [170] Power Budgeting <?>
        Kernel driver in use: ath9k
        Kernel modules: ath9k

This is as much text as I could select:
[    0.000000] BIOS-e820: [mem 0x00000000baebf000-0x00000000bafbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bafbf000-0x00000000baffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bf5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.                                                                                                                                                                                               
[    0.000000] DMI: LENOVO Lenovo G780/Product Name, BIOS 5ECN41WW(V4.00) 12/20/2012                                                                                                                                             
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved                                                                                                                                                     
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable                                                                                                                                                                   
[    0.000000] e820: last_pfn = 0x1bf600 max_arch_pfn = 0x400000000                                                                                                                                                             
[    0.000000] MTRR default type: uncachable                                                                                                                                                                                     
[    0.000000] MTRR fixed ranges enabled:                                                                                                                                                                                       
[    0.000000]   00000-9FFFF write-back                                                                                                                                                                                         
[    0.000000]   A0000-BFFFF uncachable                                                                                                                                                                                         
[    0.000000]   C0000-E7FFF write-protect                                                                                                                                                                                       
[    0.000000]   E8000-EFFFF write-combining                                                                                                                                                                                     
[    0.000000]   F0000-FFFFF write-protect                                                                                                                                                                                       
[    0.000000] MTRR variable ranges enabled:                                                                                                                                                                                     
[    0.000000]   0 base 000000000 mask F80000000 write-back                                                                                                                                                                     
[    0.000000]   1 base 080000000 mask FC0000000 write-back                                                                                                                                                                     
[    0.000000]   2 base 0BB000000 mask FFF000000 uncachable                                                                                                                                                                     
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable                                                                                                                                                                     
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect                                                                                                                                                                   
[    0.000000]   5 base 100000000 mask F80000000 write-back                                                                                                                                                                     
[    0.000000]   6 base 180000000 mask FC0000000 write-back                                                                                                                                                                     
[    0.000000]   7 base 1BF600000 mask FFFE00000 uncachable                                                                                                                                                                     
[    0.000000]   8 base 1BF800000 mask FFF800000 uncachable                                                                                                                                                                     
[    0.000000]   9 disabled                                                                                                                                                                                                     
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT                                                                                                                                                     
[    0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000                                                                                                                                                               
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]                                                                                                                                   
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576                                                                                                                                                     
[    0.000000] BRK [0x01d33000, 0x01d33fff] PGTABLE                                                                                                                                                                             
[    0.000000] BRK [0x01d34000, 0x01d34fff] PGTABLE                                                                                                                                                                             
[    0.000000] BRK [0x01d35000, 0x01d35fff] PGTABLE                                                                                                                                                                             
[    0.000000] BRK [0x01d36000, 0x01d36fff] PGTABLE
[    0.000000] BRK [0x01d37000, 0x01d37fff] PGTABLE
[    0.000000] BRK [0x01d38000, 0x01d38fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33a3a000-0x35d14fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000BAFFE210 000094 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000BAFFB000 0000F4 (v04 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x00000000BAFEE000 0099A4 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x00000000BAFBB000 000040
[    0.000000] ACPI: FACS 0x00000000BAFBB000 000040
[    0.000000] ACPI: UEFI 0x00000000BAFFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x00000000BAFFC000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x00000000BAFFA000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x00000000BAFF9000 00008C (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x00000000BAFF8000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SLIC 0x00000000BAFED000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BAFEC000 0006FE (v01 LENOVO CB-01    00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x00000000BAFEA000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x00000000BAFE5000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x00000000BAFE3000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BAFE2000 0009AA (v01 LENOVO CB-01    00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BAFE1000 000A92 (v01 LENOVO CB-01    00003000 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x00000000BAFE0000 0000B8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bf5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1bf5f6000-0x1bf5fafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001bf5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000baabefff]
[    0.000000]   node   0: [mem 0x00000000bafff000-0x00000000baffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001bf5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bf5fffff]
[    0.000000] On node 0 totalpages: 1547867
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11875 pages used for memmap
[    0.000000]   DMA32 zone: 759999 pages, LIFO batch:31
[    0.000000]   Normal zone: 12248 pages used for memmap
[    0.000000]   Normal zone: 783872 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaabf000-0xbaebefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaebf000-0xbafbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbafbf000-0xbaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[    0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff8801bf200000 s93144 r8192 d29736 u262144
[    0.000000] pcpu-alloc: s93144 r8192 d29736 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc:
  • 0 1 2 3 4 5 6 7
    [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1523659
    [    0.000000] Policy zone: Normal
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-1-amd64 root=UUID=9bc67d6d-6916-486c-a08e-6ea41b19f0e3 ro quiet splash
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [    0.000000] Memory: 5976480K/6191468K available (5869K kernel code, 1096K rwdata, 2928K rodata, 1316K init, 824K bss, 214988K reserved, 0K cma-reserved)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  Build-time adjustment of leaf fanout to 64.
    [    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
    [    0.000000] NR_IRQS:33024 nr_irqs:488 16
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
    [    0.000000] hpet clockevent registered
    [    0.000000] tsc: Fast TSC calibration using PIT
    [    0.000000] tsc: Detected 2893.475 MHz processor
    [    0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.95 BogoMIPS (lpj=11573900)
    [    0.000030] pid_max: default: 32768 minimum: 301
    [    0.000041] ACPI: Core revision 20160108
    [    0.006403] ACPI: 4 ACPI AML tables successfully acquired and loaded

    [    0.006437] Security Framework initialized
    [    0.006438] Yama: disabled by default; enable with sysctl kernel.yama.*
    [    0.006445] AppArmor: AppArmor disabled by boot time parameter
    [    0.006853] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [    0.008554] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.009322] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.009330] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.009603] Disabling memory control group subsystem
    [    0.009627] CPU: Physical Processor ID: 0
    [    0.009627] CPU: Processor Core ID: 0
    [    0.009632] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [    0.009632] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [    0.009635] mce: CPU supports 7 MCE banks
    [    0.009644] CPU0: Thermal monitoring enabled (TM1)
    [    0.009649] process: using mwait in idle threads
    [    0.009651] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    [    0.009652] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [    0.009991] Freeing SMP alternatives memory: 24K (ffffffff81c5d000 - ffffffff81c63000)
    [    0.023405] ftrace: allocating 24051 entries in 94 pages
    [    0.032004] DMAR: Host address width 36
    [    0.032006] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
    [    0.032010] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [    0.032011] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
    [    0.032015] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [    0.032016] DMAR: RMRR base: 0x000000bae8f000 end: 0x000000baeaefff
    [    0.032017] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
    [    0.032018] DMAR-IR: IOAPIC id 0 under DRHD base  0xfed91000 IOMMU 1
    [    0.032020] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
    [    0.032020] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [    0.032260] DMAR-IR: Enabled IRQ remapping in x2apic mode
    [    0.032262] x2apic enabled
    [    0.032267] Switched APIC routing to cluster x2apic.
    [    0.032712] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.072400] TSC deadline timer enabled
    [    0.072403] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
    [    0.072431] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [    0.072448] ... version:                3
    [    0.072448] ... bit width:              48
    [    0.072449] ... generic registers:      4
    [    0.072450] ... value mask:             0000ffffffffffff
    [    0.072451] ... max period:             0000ffffffffffff
    [    0.072451] ... fixed-purpose events:   3
    [    0.072452] ... event mask:             000000070000000f
    [    0.072907] x86: Booting SMP configuration:
    [    0.072909] .... node  #0, CPUs:      #1
    [    0.075339] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [    0.075420]  #2
    [    0.075983] microcode: CPU2 microcode updated early to revision 0x1c, date = 2015-02-26
    [    0.078131]  #3
    [    0.080456] x86: Booted up 1 node, 4 CPUs
    [    0.080458] smpboot: Total of 4 processors activated (23147.80 BogoMIPS)
    [    0.083692] devtmpfs: initialized
    [    0.085821] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
    [    0.085907] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
    [    0.085956] pinctrl core: initialized pinctrl subsystem
    [    0.086066] NET: Registered protocol family 16
    [    0.095551] cpuidle: using governor ladder
    [    0.107546] cpuidle: using governor menu
    [    0.107601] Simple Boot Flag at 0x44 set to 0x1
    [    0.107660] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [    0.107662] ACPI: bus type PCI registered
    [    0.107663] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [    0.107744] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [    0.107746] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [    0.107751] PCI: Using configuration type 1 for base access
    [    0.107936] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
    [    0.107940] mtrr: your CPUs had inconsistent variable MTRR settings
    [    0.107940] mtrr: probably your BIOS does not setup all CPUs.
    [    0.107941] mtrr: corrected configuration.
    [    0.123692] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.123901] ACPI: Added _OSI(Module Device)
    [    0.123903] ACPI: Added _OSI(Processor Device)
    [    0.123904] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.123904] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.125037] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.127172] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [    0.127898] ACPI: Dynamic OEM Table Load:
    [    0.127905] ACPI: SSDT 0xFFFF8801B88A4000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
    [    0.128324] ACPI: Dynamic OEM Table Load:
    [    0.128328] ACPI: SSDT 0xFFFF8801B708C400 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
    [    0.128688] ACPI: Dynamic OEM Table Load:
    [    0.128691] ACPI: SSDT 0xFFFF8801B707BA00 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
    [    0.129387] ACPI : EC: EC started
    [    0.129769] ACPI: Interpreter enabled
    [    0.129785] ACPI: (supports S0 S3 S4 S5)
    [    0.129786] ACPI: Using IOAPIC for interrupt routing
    [    0.129806] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.295033] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [    0.295037] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [    0.295138] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID
    [    0.295139] _OSC request data: 1 1f 0
    [    0.295142] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [    0.295510] PCI host bridge to bus 0000:00
    [    0.295513] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
    [    0.295514] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
    [    0.295515] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
    [    0.295517] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
    [    0.295518] pci_bus 0000:00: root bus resource [bus 00-3e]
    [    0.295524] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [    0.295597] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [    0.295605] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
    [    0.295610] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [    0.295615] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
    [    0.295718] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [    0.295737] pci 0000:00:14.0: reg 0x10: [mem 0xd0600000-0xd060ffff 64bit]
    [    0.295804] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [    0.295838] pci 0000:00:14.0: System wakeup disabled by ACPI
    [    0.295875] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [    0.295895] pci 0000:00:16.0: reg 0x10: [mem 0xd0614000-0xd061400f 64bit]
    [    0.295966] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [    0.296036] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [    0.296273] pci 0000:00:1a.0: reg 0x10: [mem 0xd0619000-0xd06193ff]
    [    0.297623] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [    0.297676] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [    0.297712] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [    0.297728] pci 0000:00:1b.0: reg 0x10: [mem 0xd0610000-0xd0613fff 64bit]
    [    0.297796] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.297833] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [    0.297867] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [    0.297939] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.298006] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [    0.298078] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [    0.298152] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [    0.298381] pci 0000:00:1d.0: reg 0x10: [mem 0xd0618000-0xd06183ff]
    [    0.299741] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [    0.299793] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [    0.299829] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
    [    0.299984] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [    0.299998] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
    [    0.300005] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
    [    0.300012] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
    [    0.300020] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
    [    0.300027] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
    [    0.300035] pci 0000:00:1f.2: reg 0x24: [mem 0xd0617000-0xd06177ff]
    [    0.300073] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.300132] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [    0.300146] pci 0000:00:1f.3: reg 0x10: [mem 0xd0615000-0xd06150ff 64bit]
    [    0.300166] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
    [    0.300344] pci 0000:01:00.0: [1969:1090] type 00 class 0x020000
    [    0.300453] pci 0000:01:00.0: reg 0x10: [mem 0xd0500000-0xd053ffff 64bit]
    [    0.300500] pci 0000:01:00.0: reg 0x18: [io  0x2000-0x207f]
    [    0.300971] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.301110] pci 0000:01:00.0: System wakeup disabled by ACPI
    [    0.307766] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [    0.307773] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
    [    0.307780] pci 0000:00:1c.0:   bridge window [mem 0xd0500000-0xd05fffff]
    [    0.307868] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
    [    0.307897] pci 0000:02:00.0: reg 0x10: [mem 0xd0400000-0xd040ffff 64bit]
    [    0.308045] pci 0000:02:00.0: supports D1
    [    0.308046] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
    [    0.308089] pci 0000:02:00.0: System wakeup disabled by ACPI
    [    0.315741] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [    0.315752] pci 0000:00:1c.1:   bridge window [mem 0xd0400000-0xd04fffff]
    [    0.392018] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [    0.392062] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [    0.392104] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [    0.392146] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [    0.392187] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [    0.392229] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [    0.392271] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [    0.392312] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [    0.392399] ACPI: Enabled 5 GPEs in block 00 to 3F
    [    0.392427] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [    0.392502] vgaarb: setting as boot device: PCI:0000:00:02.0
    [    0.392504] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.392505] vgaarb: loaded
    [    0.392506] vgaarb: bridge control possible 0000:00:02.0
    [    0.392578] PCI: Using ACPI for IRQ routing
    [    0.394070] PCI: pci_cache_line_size set to 64 bytes
    [    0.394116] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [    0.394117] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [    0.394118] e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff]
    [    0.394119] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
    [    0.394120] e820: reserve RAM buffer [mem 0x1bf600000-0x1bfffffff]
    [    0.394240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [    0.394243] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [    0.396268] clocksource: Switched to clocksource hpet
    [    0.400834] VFS: Disk quotas dquot_6.6.0
    [    0.400858] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    0.400977] pnp: PnP ACPI init
    [    0.401083] system 00:00: [io  0x0680-0x069f] has been reserved
    [    0.401085] system 00:00: [io  0x1000-0x100f] has been reserved
    [    0.401087] system 00:00: [io  0xffff] has been reserved
    [    0.401088] system 00:00: [io  0xffff] has been reserved
    [    0.401090] system 00:00: [io  0x0400-0x0453] could not be reserved
    [    0.401091] system 00:00: [io  0x0458-0x047f] has been reserved
    [    0.401092] system 00:00: [io  0x0500-0x057f] has been reserved
    [    0.401094] system 00:00: [io  0x164e-0x164f] has been reserved
    [    0.401095] system 00:00: [io  0xfd60-0xfd63] has been reserved
    [    0.401098] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.401120] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.401161] system 00:02: [io  0x0454-0x0457] has been reserved
    [    0.401163] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [    0.401184] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.401241] pnp 00:04: Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
    [    0.472431] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.472433] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
    [    0.472434] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
    [    0.472435] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
    [    0.472437] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
    [    0.472438] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    0.472440] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
    [    0.472441] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
    [    0.472443] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
    [    0.472444] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
    [    0.472445] system 00:05: [mem 0xbfa00000-0xbfa00fff] has been reserved
    [    0.472447] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.472702] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
    [    0.472703] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
    [    0.472705] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.472718] pnp: PnP ACPI: found 7 devices
    [    0.478801] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
    [    0.478825] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [    0.478828] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
    [    0.478832] pci 0000:00:1c.0:   bridge window [mem 0xd0500000-0xd05fffff]
    [    0.478840] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [    0.478845] pci 0000:00:1c.1:   bridge window [mem 0xd0400000-0xd04fffff]
    [    0.478854] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
    [    0.478855] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
    [    0.478856] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
    [    0.478858] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window]
    [    0.478859] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
    [    0.478860] pci_bus 0000:01: resource 1 [mem 0xd0500000-0xd05fffff]
    [    0.478862] pci_bus 0000:02: resource 1 [mem 0xd0400000-0xd04fffff]
    [    0.478912] NET: Registered protocol family 2
    [    0.479064] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.479182] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.479287] TCP: Hash tables configured (established 65536 bind 65536)
    [    0.479305] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [    0.479330] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [    0.479401] NET: Registered protocol family 1
    [    0.479414] pci 0000:00:02.0: Video device with shadowed ROM
    [    0.512386] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag
    [    0.512398] PCI: CLS 64 bytes, default 64
    [    0.512439] Unpacking initramfs...
    [    0.961925] Freeing initrd memory: 35692K (ffff880033a3a000 - ffff880035d15000)
    [    0.961961] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [    0.961963] software IO TLB [mem 0xb6abf000-0xbaabf000] (64MB) mapped at [ffff8800b6abf000-ffff8800baabefff]
    [    0.962018] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [    0.962019] hw unit of domain pp0-core 2^-16 Joules
    [    0.962020] hw unit of domain package 2^-16 Joules
    [    0.962020] hw unit of domain pp1-gpu 2^-16 Joules
    [    0.962411] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [    0.962449] audit: initializing netlink subsys (disabled)
    [    0.962464] audit: type=2000 audit(1465525658.952:1): initialized
    [    0.962776] Initialise system trusted keyring
    [    0.962884] zbud: loaded
    [    0.963469] Key type asymmetric registered
    [    0.963473] Asymmetric key parser 'x509' registered
    [    0.963494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [    0.963524] io scheduler noop registered
    [    0.963528] io scheduler deadline registered
    [    0.963541] io scheduler cfq registered (default)
    [    0.963813] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.963819] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.963834] intel_idle: MWAIT substates: 0x21120
    [    0.963835] intel_idle: v0.4.1 model 0x3A
    [    0.963835] intel_idle: lapic_timer_reliable_states 0xffffffff
    [    0.964000] GHES: HEST is not enabled!
    [    0.964072] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    0.964516] Linux agpgart interface v0.103
    [    0.964566] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
    [    0.964567] AMD IOMMUv2 functionality not available on this system
    [    0.964969] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12
    [    0.985856] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.985860] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.986044] mousedev: PS/2 mouse device common for all mice
    [    0.986570] rtc_cmos 00:01: RTC can wake from S4
    [    0.986729] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [    0.986757] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
    [    0.986769] Intel P-state driver initializing.
    [    0.986943] ledtrig-cpu: registered to indicate activity on CPUs
    [    0.988205] NET: Registered protocol family 10
    [    0.988644] mip6: Mobile IPv6
    [    0.988654] NET: Registered protocol family 17
    [    0.988666] mpls_gso: MPLS GSO support
    [    0.989027] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1c
    [    0.989043] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1c
    [    0.989061] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1c
    [    0.989077] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1c
    [    0.989143] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [    0.989440] registered taskstats version 1
    [    0.989465] Loading compiled-in X.509 certificates
    [    0.990000] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
    [    0.990041] zswap: loaded using pool lzo/zbud
    [    0.990709] rtc_cmos 00:01: setting system clock to 2016-06-10 02:27:39 UTC (1465525659)
    [    0.990861] PM: Hibernation image not present or could not be loaded.
    [    0.992591] Freeing unused kernel memory: 1316K (ffffffff81b14000 - ffffffff81c5d000)
    [    0.992592] Write protecting the kernel read-only data: 10240k
    [    0.992799] Freeing unused kernel memory: 264K (ffff8800015be000 - ffff880001600000)
    [    0.994531] Freeing unused kernel memory: 1168K (ffff8800018dc000 - ffff880001a00000)
    [    0.999562] x86/mm: Checked W+X mappings: passed, no W+X pages found.
    [    1.004666] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [    1.010314] random: systemd-udevd urandom read with 4 bits of entropy available
    [    1.023033] video: module verification failed: signature and/or required key missing - tainting kernel
    [    1.026071] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
    [    1.027083] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3
    [    1.027088] ACPI: Power Button [PWRB]
    [    1.027144] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input4
    [    1.027147] ACPI: Sleep Button [SLPB]
    [    1.027207] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
    [    1.027247] ACPI: Lid Switch [LID0]
    [    1.027298] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    [    1.027301] ACPI: Power Button [PWRF]
    [    1.033828] [drm] Initialized drm 1.1.0 20060810
    [    1.034352] ACPI: bus type USB registered
    [    1.034434] usbcore: registered new interface driver usbfs
    [    1.034517] usbcore: registered new interface driver hub
    [    1.034721] usbcore: registered new device driver usb
    [    1.037230] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [dc:0e:a1:fa:54:d8]
    [    1.037794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.037860] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [    1.037867] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [    1.037993] ehci-pci: EHCI PCI platform driver
    [    1.038353] thermal LNXTHERM:00: registered as thermal_zone0
    [    1.038355] ACPI: Thermal Zone [TZ00] (59 C)
    [    1.038979] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
    [    1.038985] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [    1.039083] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    1.039085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.039087] usb usb1: Product: xHCI Host Controller
    [    1.039089] usb usb1: Manufacturer: Linux 4.5.0-1-amd64 xhci-hcd
    [    1.039090] usb usb1: SerialNumber: 0000:00:14.0
    [    1.039231] hub 1-0:1.0: USB hub found
    [    1.039242] hub 1-0:1.0: 4 ports detected
    [    1.039622] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [    1.039626] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [    1.039662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
    [    1.039664] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.039665] usb usb2: Product: xHCI Host Controller
    [    1.039667] usb usb2: Manufacturer: Linux 4.5.0-1-amd64 xhci-hcd
    [    1.039669] usb usb2: SerialNumber: 0000:00:14.0
    [    1.039777] hub 2-0:1.0: USB hub found
    [    1.039789] hub 2-0:1.0: 4 ports detected
    [    1.040514] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [    1.040521] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [    1.040533] ehci-pci 0000:00:1a.0: debug port 2
    [    1.040681] SCSI subsystem initialized
    [    1.042481] libata version 3.00 loaded.
    [    1.044454] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [    1.044757] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd0619000
    [    1.056300] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [    1.056392] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [    1.056393] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.056394] usb usb3: Product: EHCI Host Controller
    [    1.056395] usb usb3: Manufacturer: Linux 4.5.0-1-amd64 ehci_hcd
    [    1.056396] usb usb3: SerialNumber: 0000:00:1a.0
    [    1.056495] hub 3-0:1.0: USB hub found
    [    1.056499] hub 3-0:1.0: 2 ports detected
    [    1.056678] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [    1.056682] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [    1.056693] ehci-pci 0000:00:1d.0: debug port 2
    [    1.060591] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [    1.060982] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0618000
    [    1.072292] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [    1.072374] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
    [    1.072375] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.072376] usb usb4: Product: EHCI Host Controller
    [    1.072377] usb usb4: Manufacturer: Linux 4.5.0-1-amd64 ehci_hcd
    [    1.072378] usb usb4: SerialNumber: 0000:00:1d.0
    [    1.072602] hub 4-0:1.0: USB hub found
    [    1.072608] hub 4-0:1.0: 2 ports detected
    [    1.072706] ahci 0000:00:1f.2: version 3.0
    [    1.072842] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [    1.082954] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
    [    1.082961] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
    [    1.089037] scsi host0: ahci
    [    1.089207] scsi host1: ahci
    [    1.089360] scsi host2: ahci
    [    1.089484] scsi host3: ahci
    [    1.089600] scsi host4: ahci
    [    1.089731] scsi host5: ahci
    [    1.089786] ata1: SATA max UDMA/133 abar m2048@0xd0617000 port 0xd0617100 irq 27
    [    1.089789] ata2: DUMMY
    [    1.089791] ata3: SATA max UDMA/133 abar m2048@0xd0617000 port 0xd0617200 irq 27
    [    1.089793] ata4: DUMMY
    [    1.089794] ata5: DUMMY
    [    1.089795] ata6: DUMMY
    [    1.092197] [drm] Memory usable by graphics device = 2048M
    [    1.092199] [drm] Replacing VGA console driver
    [    1.092725] Console: switching to colour dummy device 80x25
    [    1.098356] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [    1.098357] [drm] Driver supports precise vblank timestamp query.
    [    1.098605] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [    1.118729] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [    1.118843] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input8
    [    1.118864] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
    [    1.257245] fbcon: inteldrmfb (fb0) is primary device
    [    1.368372] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [    1.384357] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [    1.399953] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    1.400821] ata1.00: READ LOG DMA EXT failed, trying unqueued
    [    1.400861] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [    1.400863] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
    [    1.400865] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    1.401132] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [    1.401138] ata1.00: configured for UDMA/133
    [    1.402745] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  6B0Q PQ: 0 ANSI: 5
    [    1.502089] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
    [    1.502091] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [    1.502509] hub 3-1:1.0: USB hub found
    [    1.502930] hub 3-1:1.0: 6 ports detected
    [    1.516738] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
    [    1.516741] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [    1.517138] hub 4-1:1.0: USB hub found
    [    1.517317] hub 4-1:1.0: 6 ports detected
    [    1.735770] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.738991] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
    [    1.739872] ata3.00: configured for UDMA/100
    [    1.748141] scsi 2:0:0:0: CD-ROM            PLDS     DVD-RW DS8A8SH   KL31 PQ: 0 ANSI: 5
    [    1.772354] usb 3-1.2: new full-speed USB device number 3 using ehci-pci
    [    1.788361] usb 4-1.6: new high-speed USB device number 3 using ehci-pci
    [    1.867860] usb 3-1.2: New USB device found, idVendor=046d, idProduct=c52f
    [    1.867863] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [    1.867865] usb 3-1.2: Product: USB Receiver
    [    1.867866] usb 3-1.2: Manufacturer: Logitech
    [    1.871357] hidraw: raw HID events driver (C) Jiri Kosina
    [    1.874861] usbcore: registered new interface driver usbhid
    [    1.874862] usbhid: USB HID core driver
    [    1.875968] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:046D:C52F.0001/input/input9
    [    1.876086] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
    [    1.877090] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:046D:C52F.0002/input/input10
    [    1.889345] usb 4-1.6: New USB device found, idVendor=5986, idProduct=0295
    [    1.889347] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [    1.889349] usb 4-1.6: Product: Lenovo EasyCamera
    [    1.889350] usb 4-1.6: Manufacturer: Vimicro corp.
    [    1.932663] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1
    [    1.944357] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
    [    1.960329] tsc: Refined TSC clocksource calibration: 2893.430 MHz
    [    1.960332] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b5049ca8c, max_idle_ns: 440795222133 ns
    [    2.016353] usb 3-1.3: device descriptor read/64, error -32
    [    2.084599] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f02)
    [    2.108865] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
    [    2.134782] psmouse serio1: elantech: Elan sample query result 03, 3d, 85
    [    2.213480] usb 3-1.3: New USB device found, idVendor=0cf3, idProduct=3005
    [    2.213483] usb 3-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [    2.254700] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
    [    2.284346] usb 3-1.4: new high-speed USB device number 5 using ehci-pci
    [    2.377171] usb 3-1.4: New USB device found, idVendor=0bda, idProduct=0129
    [    2.377174] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    2.377176] usb 3-1.4: Product: USB2.0-CRW
    [    2.377178] usb 3-1.4: Manufacturer: Generic
    [    2.377179] usb 3-1.4: SerialNumber: 20100201396000000
    [    2.380421] Console: switching to colour frame buffer device 200x56
    [    2.382371] usbcore: registered new interface driver rtsx_usb
    [    2.386548] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [    2.400036] ata1.00: Enabling discard_zeroes_data
    [    2.400057] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
    [    2.400290] sd 0:0:0:0: [sda] Write Protect is off
    [    2.400295] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    2.400317] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.400539] ata1.00: Enabling discard_zeroes_data
    [    2.401221]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
    [    2.401665] ata1.00: Enabling discard_zeroes_data
    [    2.401762] sd 0:0:0:0: [sda] Attached SCSI disk
    [    2.414018] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [    2.414024] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    2.414179] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [    2.934805] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [    2.960287] clocksource: Switched to clocksource tsc
    [    2.980379] systemd[1]: RTC configured in localtime, applying delta of -600 minutes to system time.
    [    2.990788] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
    [    2.990951] systemd[1]: Detected architecture x86-64.
    [    2.991088] systemd[1]: Set hostname to <sparky>.
    [    3.042640] systemd[1]: Listening on udev Control Socket.
    [    3.042691] systemd[1]: Reached target User and Group Name Lookups.
    [    3.042719] systemd[1]: Listening on Journal Socket (/dev/log).
    [    3.042748] systemd[1]: Listening on Journal Socket.
    [    3.042852] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [    3.042955] systemd[1]: Created slice User and Session Slice.
    [    3.042977] systemd[1]: Listening on Syslog Socket.
    [    3.042995] systemd[1]: Listening on udev Kernel Socket.
    [    3.043073] systemd[1]: Created slice System Slice.
    [    3.060342] systemd[1]: Mounting Debug File System...
    [    3.061615] systemd[1]: Starting Load Kernel Modules...
    [    3.061646] systemd[1]: Reached target Slices.
    [    3.062147] systemd[1]: Mounting Huge Pages File System...
    [    3.062217] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [    3.062293] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [    3.062333] systemd[1]: Listening on fsck to fsckd communication Socket.
    [    3.062828] systemd[1]: Starting Set the console keyboard layout...
    [    3.063335] systemd[1]: Starting Uncomplicated firewall...
    [    3.063695] systemd[1]: Reached target Encrypted Volumes.
    [    3.064262] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [    3.064366] systemd[1]: Listening on Journal Audit Socket.
    [    3.064890] systemd[1]: Starting Journal Service...
    [    3.065422] systemd[1]: Mounting POSIX Message Queue File System...
    [    3.066117] systemd[1]: Starting Remount Root and Kernel File Systems...
    [    3.066138] systemd[1]: Reached target Remote File Systems (Pre).
    [    3.066166] systemd[1]: Reached target Remote File Systems.
    [    3.067878] systemd[1]: Mounted Debug File System.
    [    3.067962] systemd[1]: Mounted Huge Pages File System.
    [    3.068424] systemd[1]: Started Uncomplicated firewall.
    [    3.070007] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [    3.070799] lp: driver loaded but no devices found
    [    3.070976] systemd[1]: Mounted POSIX Message Queue File System.
    [    3.072530] ppdev: user-space parallel port driver
    [    3.076515] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
    [    3.078282] systemd[1]: Started Remount Root and Kernel File Systems.
    [    3.083459] Key type encrypted registered
    [    3.086788] loop: module loaded
    [    3.087373] systemd[1]: Started Load Kernel Modules.
    [    3.096205] systemd[1]: Started Journal Service.
    [    3.139455] systemd-journald[205]: Received request to flush runtime journal from PID 1
    [    3.240964] ACPI: AC Adapter [ACAD] (on-line)
    [    3.247607] wmi: Mapper loaded
    [    3.288652] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [    3.289369] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160108/utaddress-255)
    [    3.289376] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [    3.289383] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
    [    3.289388] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [    3.289389] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
    [    3.289392] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [    3.289393] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
    [    3.289396] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [    3.289397] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [    3.289682] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    3.290236] sr 2:0:0:0: Attached scsi generic sg1 type 5
    [    3.290701] media: Linux media interface: v0.10
    [    3.291329] Bluetooth: Core ver 2.21
    [    3.291341] NET: Registered protocol family 31
    [    3.291342] Bluetooth: HCI device and connection manager initialized
    [    3.291345] Bluetooth: HCI socket layer initialized
    [    3.291348] Bluetooth: L2CAP socket layer initialized
    [    3.291353] Bluetooth: SCO socket layer initialized
    [    3.294200] Linux video capture interface: v2.00
    [    3.295053] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input11
    [    3.296734] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305F conflicts with OpRegion 0x0000000000003040-0x000000000000304F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
    [    3.296740] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [    3.296996] usbcore: registered new interface driver btusb
    [    3.300161] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0295)
    [    3.300982] input: PC Speaker as /devices/platform/pcspkr/input/input12
    [    3.301267] uvcvideo 4-1.6:1.0: Entity type for entity Processing 2 was not initialized!
    [    3.301271] uvcvideo 4-1.6:1.0: Entity type for entity Camera 1 was not initialized!
    [    3.301273] uvcvideo 4-1.6:1.0: Entity type for entity Extension 4 was not initialized!
    [    3.301655] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input13
    [    3.301829] usbcore: registered new interface driver uvcvideo
    [    3.301831] USB Video Class driver (1.1.1)
    [    3.320416] AVX version of gcm_enc/dec engaged.
    [    3.320418] AES CTR mode by8 optimization enabled
    [    3.320580] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
    [    3.321018] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
    [    3.321020] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [    3.321022] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
    [    3.321023] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
    [    3.321025] snd_hda_codec_conexant hdaudioC0D0:    inputs:
    [    3.321027] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1b
    [    3.321028] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1a
    [    3.322098] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
    [    3.333836] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
    [    3.370772] intel_rapl: Found RAPL domain package
    [    3.370775] intel_rapl: Found RAPL domain core
    [    3.370777] intel_rapl: Found RAPL domain uncore
    [    3.370782] intel_rapl: RAPL package 0 domain package locked by BIOS
    [    3.372226] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [    3.372542] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [    3.372602] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
    [    3.372659] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
    [    3.374790] ath: phy0: ASPM enabled: 0x42
    [    3.374792] ath: EEPROM regdomain: 0x65
    [    3.374793] ath: EEPROM indicates we should expect a direct regpair map
    [    3.374795] ath: Country alpha2 being used: 00
    [    3.374795] ath: Regpair used: 0x65
    [    3.378613] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [    3.378837] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000f20000, irq=17
    [    3.393322] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: errors=remount-ro
    [    3.394326] Adding 1665020k swap on /dev/sda7.  Priority:-1 extents:1 across:1665020k SSFS
    [    3.406402] iTCO_vendor_support: vendor-support=0
    [    3.406769] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [    3.406802] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [    3.407427] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [    3.480263] ACPI: Battery Slot [BAT1] (battery present)
    [    3.738621] random: nonblocking pool is initialized
    [    3.760477] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [    3.760480] Bluetooth: BNEP filters: protocol multicast
    [    3.760484] Bluetooth: BNEP socket layer initialized
    [    3.883084] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [    3.897988] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [    3.906332] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [    3.908490] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [    4.004802] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [    6.357725] fuse init (API version 7.24)
    [   31.367348] QXcbEventReader[1632]: segfault at 7fd1774f1789 ip 00007fd1774f1789 sp 00007fd1759bfd20 error 14 in locale-archive[7fd1775a1000+18e000]
    [   32.044928] Bluetooth: RFCOMM TTY layer initialized
    [   32.044936] Bluetooth: RFCOMM socket layer initialized
    [   32.044941] Bluetooth: RFCOMM ver 1.11
    [  170.595423] alx 0000:01:00.0 eth0: NIC Up: 100 Mbps Full
    [  170.596099] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [  924.444034] alx 0000:01:00.0 eth0: Link Down
    [  926.429871] alx 0000:01:00.0 eth0: NIC Up: 100 Mbps Full
    [  942.052520] alx 0000:01:00.0 eth0: Link Down
    [  943.870001] alx 0000:01:00.0 eth0: NIC Up: 100 Mbps Full
    [ 1474.584848] alx 0000:01:00.0 eth0: Link Down
    [ 1492.557696] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 1492.573514] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 1492.575235] wlan0: authenticated
    [ 1492.577545] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [ 1492.585475] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [ 1492.585617] wlan0: associated
    [ 1492.585744] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 2031.512902] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 2038.019302] systemd[1]: apt-daily.timer: Adding 4h 33min 59.073477s random time.
    [ 2038.097591] systemd[1]: apt-daily.timer: Adding 4h 5min 9.100571s random time.
    [ 2038.162019] systemd[1]: apt-daily.timer: Adding 33min 49.141716s random time.
    [ 2042.791538] systemd[1]: apt-daily.timer: Adding 10h 4min 37.540644s random time.
    [ 2045.742852] systemd[1]: apt-daily.timer: Adding 8h 2min 34.732966s random time.
    [ 2046.864872] systemd[1]: apt-daily.timer: Adding 6h 29min 36.251649s random time.
    [ 2047.181295] systemd[1]: apt-daily.timer: Adding 26min 30.569388s random time.
    [ 2051.749225] systemd[1]: apt-daily.timer: Adding 47min 4.325180s random time.
    [ 2051.796563] systemd[1]: apt-daily.timer: Adding 7h 54min 17.674091s random time.
    [ 2051.839144] systemd[1]: apt-daily.timer: Adding 9h 57min 23.374742s random time.
    [ 2058.439007] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 2058.452088] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 2058.455115] wlan0: authenticated
    [ 2058.457957] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [ 2058.460591] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [ 2058.460694] wlan0: associated
    [ 2058.460729] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 2445.615953] wlan0: deauthenticating from 10:0d:7f:76:a6:67 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 2445.728338] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 2445.729311] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 2445.735349] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 2445.804384] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 2446.763982] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 2446.777148] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 2446.778836] wlan0: authenticated
    [ 2446.779616] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [ 2446.782179] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [ 2446.782289] wlan0: associated
    [ 2446.782315] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 2469.948855] device-mapper: uevent: version 1.0.3
    [ 2469.948967] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
    [ 2471.276976] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [ 2471.278740] JFS: nTxBlock = 8192, nTxLock = 65536
    [ 2471.285332] ntfs: driver 2.1.32 [Flags: R/O MODULE].
    [ 2471.291534] QNX4 filesystem 0.2.3 registered.
    [ 2471.362209] raid6: sse2x1   gen()  9673 MB/s
    [ 2471.430222] raid6: sse2x1   xor()  7610 MB/s
    [ 2471.498234] raid6: sse2x2   gen() 12209 MB/s
    [ 2471.566248] raid6: sse2x2   xor()  8679 MB/s
    [ 2471.634261] raid6: sse2x4   gen() 14311 MB/s
    [ 2471.702273] raid6: sse2x4   xor() 10590 MB/s
    [ 2471.702274] raid6: using algorithm sse2x4 gen() 14311 MB/s
    [ 2471.702275] raid6: .... xor() 10590 MB/s, rmw enabled
    [ 2471.702276] raid6: using ssse3x2 recovery algorithm
    [ 2471.702596] xor: automatically using best checksumming function:
    [ 2471.742279]    avx       : 26142.000 MB/sec
    [ 2471.744951] Btrfs loaded
    [ 2471.916284] EXT4-fs (sda2): unable to read superblock
    [ 2471.917420] EXT4-fs (sda2): unable to read superblock
    [ 2471.918544] EXT4-fs (sda2): unable to read superblock
    [ 2471.922302] XFS (sda2): Invalid superblock magic number
    [ 2471.925960] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    [ 2471.926089] FAT-fs (sda2): bogus number of reserved sectors
    [ 2471.926091] FAT-fs (sda2): Can't find a valid FAT filesystem
    [ 2471.927013] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    [ 2471.927137] FAT-fs (sda2): bogus number of reserved sectors
    [ 2471.927139] FAT-fs (sda2): Can't find a valid FAT filesystem
    [ 2471.929949] MINIX-fs: unable to read superblock
    [ 2471.932110] attempt to access beyond end of device
    [ 2471.932114] sda2: rw=16, want=3, limit=2
    [ 2471.932116] hfsplus: unable to find HFS+ superblock
    [ 2471.933282] qnx4: no qnx4 filesystem (no root dir).
    [ 2471.934206] ufs: You didn't specify the type of your ufs filesystem
                                                                                                                                                                                                                                     
                   mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...                                                                                                                     
                                                                                                                                                                                                                                     
                   >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old                                                                                                                                   
    [ 2471.936102] hfs: can't find a HFS filesystem on dev sda2
    [ 3106.257219] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 3106.274868] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 3106.364487] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
    [ 3106.437078] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
    [ 3106.509706] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
    [ 3120.463037] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 3147.451169] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 3147.464368] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 3147.466165] wlan0: authenticated
    [ 3147.468977] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [ 3147.471554] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [ 3147.471680] wlan0: associated
    [ 3147.471715] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 4196.230332] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 4196.249115] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 4196.318788] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
    [ 4196.366397] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
    [ 4196.424664] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
    [ 4210.454838] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 4237.418938] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 4237.432111] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 4237.434325] wlan0: authenticated
    [ 4237.436636] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [ 4237.439206] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [ 4237.439322] wlan0: associated
    [ 4237.439357] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 5286.215280] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 5286.234572] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 5286.309450] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
    [ 5286.394502] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
    [ 5286.494775] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
    [ 5300.439033] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 5327.345297] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 5327.358289] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 5327.362390] wlan0: authenticated
    [ 5327.366225] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [ 5327.369018] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [ 5327.369144] wlan0: associated
    [ 5327.369172] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 6376.172609] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 6376.185810] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 6376.220092] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
    [ 6376.275346] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
    [ 6376.333866] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
    [ 6390.403430] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 6417.344217] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 6417.357302] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 6417.362785] wlan0: authenticated
    [ 6417.365926] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [ 6417.373046] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [ 6417.373158] wlan0: associated
    [ 6417.373202] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 7466.169890] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 7466.186987] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 7466.288239] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
    [ 7466.352640] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
    [ 7466.440055] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
    [ 7480.385256] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 7507.305882] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 7507.319028] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 7507.324930] wlan0: authenticated
    [ 7507.327747] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [ 7507.330309] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [ 7507.330414] wlan0: associated
    [ 7507.330449] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 8569.346906] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 8596.278584] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 8596.291682] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 8596.293873] wlan0: authenticated
    [ 8596.295132] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [ 8596.299119] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [ 8596.299223] wlan0: associated
    [ 8596.299262] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 9645.076250] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 9645.093751] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 9645.189890] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
    [ 9645.213941] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
    [ 9645.341682] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
    [ 9659.302138] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 9686.235130] wlan0: authenticate with 10:0d:7f:76:a6:67
    [ 9686.248180] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [ 9686.250765] wlan0: authenticated
    [ 9686.252108] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [ 9686.254659] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [ 9686.254756] wlan0: associated
    [ 9686.254791] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [10748.267384] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [10775.223977] wlan0: authenticate with 10:0d:7f:76:a6:67
    [10775.237013] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [10775.239093] wlan0: authenticated
    [10775.240489] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [10775.243146] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [10775.243246] wlan0: associated
    [10775.243279] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [11477.877007] perf interrupt took too long (2608 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
    [11837.216207] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [11864.193099] wlan0: authenticate with 10:0d:7f:76:a6:67
    [11864.206216] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [11864.210320] wlan0: authenticated
    [11864.211426] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [11864.219635] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [11864.219752] wlan0: associated
    [11864.219791] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [12912.941968] wlan0: authenticate with 10:0d:7f:76:a6:67
    [12912.958029] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [12913.039143] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
    [12913.125706] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
    [12913.203428] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
    [12927.164185] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [12954.155563] wlan0: authenticate with 10:0d:7f:76:a6:67
    [12954.168589] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [12954.176984] wlan0: authenticated
    [12954.180268] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [12954.182989] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [12954.183111] wlan0: associated
    [12954.183139] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [14002.898147] wlan0: authenticate with 10:0d:7f:76:a6:67
    [14002.913380] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [14002.984581] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
    [14003.077902] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
    [14003.150315] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
    [14017.118604] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [14044.073524] wlan0: authenticate with 10:0d:7f:76:a6:67
    [14044.086585] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [14044.090624] wlan0: authenticated
    [14044.091720] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [14044.094354] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [14044.094454] wlan0: associated
    [14044.094487] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [15106.080947] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [15133.052927] wlan0: authenticate with 10:0d:7f:76:a6:67
    [15133.066008] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [15133.067700] wlan0: authenticated
    [15133.067891] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [15133.070554] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [15133.070658] wlan0: associated
    [15133.070703] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [16181.832455] wlan0: authenticate with 10:0d:7f:76:a6:67
    [16181.848424] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [16181.907397] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
    [16181.985926] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
    [16182.059138] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
    [16196.040158] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [16222.999370] wlan0: authenticate with 10:0d:7f:76:a6:67
    [16223.012496] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [16223.014327] wlan0: authenticated
    [16223.018167] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [16223.020751] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [16223.020866] wlan0: associated
    [16223.020911] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [17285.009919] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [17311.985415] wlan0: authenticate with 10:0d:7f:76:a6:67
    [17311.998610] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [17312.002872] wlan0: authenticated
    [17312.004664] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [17312.010259] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [17312.010375] wlan0: associated
    [17312.010436] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [18373.967041] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [18400.949094] wlan0: authenticate with 10:0d:7f:76:a6:67
    [18400.962140] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [18400.968466] wlan0: authenticated
    [18400.970496] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [18400.973048] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [18400.973151] wlan0: associated
    [18400.973196] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [19462.925513] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [19489.908917] wlan0: authenticate with 10:0d:7f:76:a6:67
    [19489.922302] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [19489.926206] wlan0: authenticated
    [19489.928089] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [19489.930644] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [19489.930750] wlan0: associated
    [19489.930790] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [20538.676945] wlan0: authenticate with 10:0d:7f:76:a6:67
    [20538.695925] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [20538.801318] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
    [20538.882466] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
    [20538.943496] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
    [20552.882165] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [20579.847902] wlan0: authenticate with 10:0d:7f:76:a6:67
    [20579.861170] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [20579.865339] wlan0: authenticated
    [20579.865978] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [20579.868562] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [20579.868664] wlan0: associated
    [20579.868696] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [21641.845227] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [21668.763537] wlan0: authenticate with 10:0d:7f:76:a6:67
    [21668.776571] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [21668.778273] wlan0: authenticated
    [21668.779490] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [21668.782203] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [21668.782305] wlan0: associated
    [21668.782372] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [22730.799376] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [22757.784752] wlan0: authenticate with 10:0d:7f:76:a6:67
    [22757.797835] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [22757.799533] wlan0: authenticated
    [22757.800240] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [22757.802813] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [22757.802924] wlan0: associated
    [22757.802963] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [23819.755764] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [23846.717963] wlan0: authenticate with 10:0d:7f:76:a6:67
    [23846.731083] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [23846.734587] wlan0: authenticated
    [23846.737406] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [23846.744538] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [23846.744652] wlan0: associated
    [23846.744706] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [24895.476023] wlan0: authenticate with 10:0d:7f:76:a6:67
    [24895.491849] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [24895.558159] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
    [24895.624171] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
    [24895.710139] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
    [24909.711674] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [24936.683357] wlan0: authenticate with 10:0d:7f:76:a6:67
    [24936.696477] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [24936.698344] wlan0: authenticated
    [24936.702320] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [24936.705821] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [24936.705927] wlan0: associated
    [24936.705973] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [25082.475164] wlan0: deauthenticating from 10:0d:7f:76:a6:67 by local choice (Reason: 3=DEAUTH_LEAVING)
    [25101.792034] alx 0000:01:00.0 eth0: NIC Up: 100 Mbps Full
    [25101.792405] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [25302.876399] alx 0000:01:00.0 eth0: Link Down
    [25312.597689] wlan0: authenticate with 10:0d:7f:76:a6:67
    [25312.615303] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
    [25312.617016] wlan0: authenticated
    [25312.619963] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
    [25312.623307] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
    [25312.623409] wlan0: associated
    [25323.243228] usb 3-1.4: reset high-speed USB device number 5 using ehci-pci
    [25441.261684] wlan0: deauthenticating from 10:0d:7f:76:a6:67 by local choice (Reason: 3=DEAUTH_LEAVING)
    [25458.134136] alx 0000:01:00.0 eth0: NIC Up: 100 Mbps Full

pavroo

Your wireled device uses alx driver (Qualcomm Atheros AR8162 Fast Ethernet) and it is fully supported, installed and in use.
QuoteThe non working cable seems to be a problem in most distros I try.
Are you sure is your device not broken?

If not, here is a solution:
https://forums.kali.org/showthread.php?960-How-to-install-Atheros-AR8162-Ethernet-drivers
Nothing is easy as it looks. Danielle Steel
Join #sparkylinux.org at irc.libera.chat

vectoravtech

It turns out I did reflash my N600 Netgear with a version with heartbleed protection and the internet works fine now. Please delete this post. Sparky works great! :D I even setup Slim Samba 2 on a usb stick. I also need to buy a crimping set so I can make my own cables as well.
[gallery][/gallery]

View the most recent posts on the forum