I just installed Sparky Linux Gameover Edition and only my wifi works, RJ45 dont

vectoravtech · June 05, 2016, 08:28:36 AM

I'm on a Lenovo G780 laptop and I want to get my cable working so I dont have to game on wifi. How can I fix this? Thankyou in advance and I'm very excited. This distro is amazing! :D

The non working cable seems to be a problem in most distros I try.

paxmark1 · June 05, 2016, 09:25:56 AM

command line output helps to debug.

vectoravtech · June 06, 2016, 02:19:38 AM

ok, what should I type?

pavroo · June 06, 2016, 08:55:51 PM

Probably your device works on rtl8150 chipset, but show an output:

Code Select

lspci -v
dmesg

vectoravtech · June 07, 2016, 12:18:03 PM

By the way now I'm using KDE Sparky with the same problem.

@sparky:~$ lspci -v
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
Subsystem: Lenovo 3rd Gen Core processor DRAM Controller
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo 3rd Gen Core processor Graphics Controller
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo 7 Series/C210 Series Chipset Family USB xHCI Host Controller
Flags: bus master, medium devsel, latency 0, IRQ 26
Memory at d0600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci

00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Lenovo 7 Series/C210 Series Chipset Family MEI Controller
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at d0614000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me

00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo 7 Series/C210 Series Chipset Family USB Enhanced Host Controller
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at d0619000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci

00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Lenovo 7 Series/C210 Series Chipset Family High Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 30
Memory at d0610000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 17
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0500000-d05fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: d0400000-d04fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo 7 Series/C210 Series Chipset Family USB Enhanced Host Controller
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at d0618000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci

00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
Subsystem: Lenovo HM76 Express Chipset LPC Controller
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 28
I/O ports at 3088 [size=8]
I/O ports at 3094
I/O ports at 3080 [size=8]
I/O ports at 3090
I/O ports at 3060 [size=32]
Memory at d0617000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Lenovo 7 Series/C210 Series Chipset Family SMBus Controller
Flags: medium devsel, IRQ 19
Memory at d0615000 (64-bit, non-prefetchable) [size=256]
I/O ports at 3040 [size=32]
Kernel modules: i2c_i801

01:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 08)
Subsystem: Lenovo AR8162 Fast Ethernet
Flags: bus master, fast devsel, latency 0, IRQ 31
Memory at d0500000 (64-bit, non-prefetchable) [size=256K]
I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
Kernel modules: alx

02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Lenovo AR9285 Wireless Network Adapter (PCI-Express)
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at d0400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k

pavroo · June 09, 2016, 12:11:24 AM

Did you connect your rj45 device before running the lspci command?
What about the second one: dmesg
If your device is connected via an USB port, show one more:

Code Select

lsusb

vectoravtech · June 10, 2016, 09:30:38 AM

Seperated commands this time (I made sure the RJ45 was plugged in also) //

lspci -v
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
Subsystem: Lenovo 3rd Gen Core processor DRAM Controller
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: ivb_uncore

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo 3rd Gen Core processor Graphics Controller
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
Kernel modules: i915

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo 7 Series/C210 Series Chipset Family USB xHCI Host Controller
Flags: bus master, medium devsel, latency 0, IRQ 26
Memory at d0600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci

00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Lenovo 7 Series/C210 Series Chipset Family MEI Controller
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at d0614000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: mei_me
Kernel modules: mei_me

00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo 7 Series/C210 Series Chipset Family USB Enhanced Host Controller
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at d0619000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci

00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Lenovo 7 Series/C210 Series Chipset Family High Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 30
Memory at d0610000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 17
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0500000-d05fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Lenovo 7 Series/C210 Series Chipset Family PCI Express Root Port 1
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: d0400000-d04fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Lenovo 7 Series/C210 Series Chipset Family PCI Express Root Port 2
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo 7 Series/C210 Series Chipset Family USB Enhanced Host Controller
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at d0618000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci

00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
Subsystem: Lenovo HM76 Express Chipset LPC Controller
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 27
I/O ports at 3088 [size=8]
I/O ports at 3094
I/O ports at 3080 [size=8]
I/O ports at 3090
I/O ports at 3060 [size=32]
Memory at d0617000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Lenovo 7 Series/C210 Series Chipset Family SMBus Controller
Flags: medium devsel, IRQ 19
Memory at d0615000 (64-bit, non-prefetchable) [size=256]
I/O ports at 3040 [size=32]
Kernel modules: i2c_i801

01:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 08)
Subsystem: Lenovo AR8162 Fast Ethernet
Flags: bus master, fast devsel, latency 0, IRQ 31
Memory at d0500000 (64-bit, non-prefetchable) [size=256K]
I/O ports at 2000 [size=128]
Capabilities: [40] Power Management version 3
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [c0] MSI: Enable+ Count=1/16 Maskable+ 64bit+
Capabilities: [d8] MSI-X: Enable- Count=16 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [180] Device Serial Number ff-fa-54-d8-dc-0e-a1-ff
Kernel driver in use: alx
Kernel modules: alx

02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Lenovo AR9285 Wireless Network Adapter (PCI-Express)
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at d0400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [60] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-15-17-ff-ff-24-14-12
Capabilities: [170] Power Budgeting <?>
Kernel driver in use: ath9k
Kernel modules: ath9k

This is as much text as I could select:
[ 0.000000] BIOS-e820: [mem 0x00000000baebf000-0x00000000bafbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bafbf000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bf5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO Lenovo G780/Product Name, BIOS 5ECN41WW(V4.00) 12/20/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1bf600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 base 180000000 mask FC0000000 write-back
[ 0.000000] 7 base 1BF600000 mask FFFE00000 uncachable
[ 0.000000] 8 base 1BF800000 mask FFF800000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] BRK [0x01d33000, 0x01d33fff] PGTABLE
[ 0.000000] BRK [0x01d34000, 0x01d34fff] PGTABLE
[ 0.000000] BRK [0x01d35000, 0x01d35fff] PGTABLE
[ 0.000000] BRK [0x01d36000, 0x01d36fff] PGTABLE
[ 0.000000] BRK [0x01d37000, 0x01d37fff] PGTABLE
[ 0.000000] BRK [0x01d38000, 0x01d38fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33a3a000-0x35d14fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000BAFFE210 000094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000BAFFB000 0000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x00000000BAFEE000 0099A4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x00000000BAFBB000 000040
[ 0.000000] ACPI: FACS 0x00000000BAFBB000 000040
[ 0.000000] ACPI: UEFI 0x00000000BAFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x00000000BAFFC000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x00000000BAFFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x00000000BAFF9000 00008C (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x00000000BAFF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 0x00000000BAFED000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000BAFEC000 0006FE (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x00000000BAFEA000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x00000000BAFE5000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x00000000BAFE3000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000BAFE2000 0009AA (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000BAFE1000 000A92 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x00000000BAFE0000 0000B8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bf5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1bf5f6000-0x1bf5fafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bf5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000baabefff]
[ 0.000000] node 0: [mem 0x00000000bafff000-0x00000000baffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001bf5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bf5fffff]
[ 0.000000] On node 0 totalpages: 1547867
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11875 pages used for memmap
[ 0.000000] DMA32 zone: 759999 pages, LIFO batch:31
[ 0.000000] Normal zone: 12248 pages used for memmap
[ 0.000000] Normal zone: 783872 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaabf000-0xbaebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaebf000-0xbafbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbafbf000-0xbaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ 0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff8801bf200000 s93144 r8192 d29736 u262144
[ 0.000000] pcpu-alloc: s93144 r8192 d29736 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc:

0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1523659
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-1-amd64 root=UUID=9bc67d6d-6916-486c-a08e-6ea41b19f0e3 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5976480K/6191468K available (5869K kernel code, 1096K rwdata, 2928K rodata, 1316K init, 824K bss, 214988K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.475 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.95 BogoMIPS (lpj=11573900)
[ 0.000030] pid_max: default: 32768 minimum: 301
[ 0.000041] ACPI: Core revision 20160108
[ 0.006403] ACPI: 4 ACPI AML tables successfully acquired and loaded

[ 0.006437] Security Framework initialized
[ 0.006438] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.006445] AppArmor: AppArmor disabled by boot time parameter
[ 0.006853] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008554] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009322] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.009330] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.009603] Disabling memory control group subsystem
[ 0.009627] CPU: Physical Processor ID: 0
[ 0.009627] CPU: Processor Core ID: 0
[ 0.009632] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.009632] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.009635] mce: CPU supports 7 MCE banks
[ 0.009644] CPU0: Thermal monitoring enabled (TM1)
[ 0.009649] process: using mwait in idle threads
[ 0.009651] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009652] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009991] Freeing SMP alternatives memory: 24K (ffffffff81c5d000 - ffffffff81c63000)
[ 0.023405] ftrace: allocating 24051 entries in 94 pages
[ 0.032004] DMAR: Host address width 36
[ 0.032006] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.032010] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.032011] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.032015] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.032016] DMAR: RMRR base: 0x000000bae8f000 end: 0x000000baeaefff
[ 0.032017] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
[ 0.032018] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.032020] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.032020] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.032260] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.032262] x2apic enabled
[ 0.032267] Switched APIC routing to cluster x2apic.
[ 0.032712] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072400] TSC deadline timer enabled
[ 0.072403] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.072431] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.072448] ... version: 3
[ 0.072448] ... bit width: 48
[ 0.072449] ... generic registers: 4
[ 0.072450] ... value mask: 0000ffffffffffff
[ 0.072451] ... max period: 0000ffffffffffff
[ 0.072451] ... fixed-purpose events: 3
[ 0.072452] ... event mask: 000000070000000f
[ 0.072907] x86: Booting SMP configuration:
[ 0.072909] .... node #0, CPUs: #1
[ 0.075339] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.075420] #2
[ 0.075983] microcode: CPU2 microcode updated early to revision 0x1c, date = 2015-02-26
[ 0.078131] #3
[ 0.080456] x86: Booted up 1 node, 4 CPUs
[ 0.080458] smpboot: Total of 4 processors activated (23147.80 BogoMIPS)
[ 0.083692] devtmpfs: initialized
[ 0.085821] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
[ 0.085907] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.085956] pinctrl core: initialized pinctrl subsystem
[ 0.086066] NET: Registered protocol family 16
[ 0.095551] cpuidle: using governor ladder
[ 0.107546] cpuidle: using governor menu
[ 0.107601] Simple Boot Flag at 0x44 set to 0x1
[ 0.107660] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.107662] ACPI: bus type PCI registered
[ 0.107663] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.107744] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.107746] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.107751] PCI: Using configuration type 1 for base access
[ 0.107936] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.107940] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.107940] mtrr: probably your BIOS does not setup all CPUs.
[ 0.107941] mtrr: corrected configuration.
[ 0.123692] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.123901] ACPI: Added _OSI(Module Device)
[ 0.123903] ACPI: Added _OSI(Processor Device)
[ 0.123904] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.123904] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.125037] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.127172] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.127898] ACPI: Dynamic OEM Table Load:
[ 0.127905] ACPI: SSDT 0xFFFF8801B88A4000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.128324] ACPI: Dynamic OEM Table Load:
[ 0.128328] ACPI: SSDT 0xFFFF8801B708C400 000303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.128688] ACPI: Dynamic OEM Table Load:
[ 0.128691] ACPI: SSDT 0xFFFF8801B707BA00 000119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.129387] ACPI : EC: EC started
[ 0.129769] ACPI: Interpreter enabled
[ 0.129785] ACPI: (supports S0 S3 S4 S5)
[ 0.129786] ACPI: Using IOAPIC for interrupt routing
[ 0.129806] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.295033] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.295037] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.295138] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID
[ 0.295139] _OSC request data: 1 1f 0
[ 0.295142] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.295510] PCI host bridge to bus 0000:00
[ 0.295513] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.295514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.295515] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.295517] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
[ 0.295518] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.295524] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.295597] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.295605] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.295610] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.295615] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.295718] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.295737] pci 0000:00:14.0: reg 0x10: [mem 0xd0600000-0xd060ffff 64bit]
[ 0.295804] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.295838] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.295875] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.295895] pci 0000:00:16.0: reg 0x10: [mem 0xd0614000-0xd061400f 64bit]
[ 0.295966] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.296036] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.296273] pci 0000:00:1a.0: reg 0x10: [mem 0xd0619000-0xd06193ff]
[ 0.297623] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.297676] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.297712] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.297728] pci 0000:00:1b.0: reg 0x10: [mem 0xd0610000-0xd0613fff 64bit]
[ 0.297796] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.297833] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.297867] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.297939] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.298006] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.298078] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.298152] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.298381] pci 0000:00:1d.0: reg 0x10: [mem 0xd0618000-0xd06183ff]
[ 0.299741] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.299793] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.299829] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.299984] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.299998] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.300005] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.300012] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.300020] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.300027] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.300035] pci 0000:00:1f.2: reg 0x24: [mem 0xd0617000-0xd06177ff]
[ 0.300073] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.300132] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.300146] pci 0000:00:1f.3: reg 0x10: [mem 0xd0615000-0xd06150ff 64bit]
[ 0.300166] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
[ 0.300344] pci 0000:01:00.0: [1969:1090] type 00 class 0x020000
[ 0.300453] pci 0000:01:00.0: reg 0x10: [mem 0xd0500000-0xd053ffff 64bit]
[ 0.300500] pci 0000:01:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.300971] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.301110] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.307766] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.307773] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.307780] pci 0000:00:1c.0: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.307868] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.307897] pci 0000:02:00.0: reg 0x10: [mem 0xd0400000-0xd040ffff 64bit]
[ 0.308045] pci 0000:02:00.0: supports D1
[ 0.308046] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.308089] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.315741] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.315752] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.392018] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.392062] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.392104] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.392146] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.392187] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.392229] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.392271] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.392312] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.392399] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.392427] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.392502] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.392504] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.392505] vgaarb: loaded
[ 0.392506] vgaarb: bridge control possible 0000:00:02.0
[ 0.392578] PCI: Using ACPI for IRQ routing
[ 0.394070] PCI: pci_cache_line_size set to 64 bytes
[ 0.394116] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.394117] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.394118] e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff]
[ 0.394119] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.394120] e820: reserve RAM buffer [mem 0x1bf600000-0x1bfffffff]
[ 0.394240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.394243] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.396268] clocksource: Switched to clocksource hpet
[ 0.400834] VFS: Disk quotas dquot_6.6.0
[ 0.400858] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.400977] pnp: PnP ACPI init
[ 0.401083] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.401085] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.401087] system 00:00: [io 0xffff] has been reserved
[ 0.401088] system 00:00: [io 0xffff] has been reserved
[ 0.401090] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 0.401091] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.401092] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.401094] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.401095] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 0.401098] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.401120] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.401161] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.401163] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.401184] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.401241] pnp 00:04: Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
[ 0.472431] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.472433] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.472434] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.472435] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.472437] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.472438] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.472440] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.472441] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 0.472443] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.472444] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.472445] system 00:05: [mem 0xbfa00000-0xbfa00fff] has been reserved
[ 0.472447] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.472702] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.472703] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[ 0.472705] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.472718] pnp: PnP ACPI: found 7 devices
[ 0.478801] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.478825] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.478828] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.478832] pci 0000:00:1c.0: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.478840] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.478845] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.478854] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.478855] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.478856] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.478858] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window]
[ 0.478859] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.478860] pci_bus 0000:01: resource 1 [mem 0xd0500000-0xd05fffff]
[ 0.478862] pci_bus 0000:02: resource 1 [mem 0xd0400000-0xd04fffff]
[ 0.478912] NET: Registered protocol family 2
[ 0.479064] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.479182] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.479287] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.479305] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.479330] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.479401] NET: Registered protocol family 1
[ 0.479414] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.512386] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.512398] PCI: CLS 64 bytes, default 64
[ 0.512439] Unpacking initramfs...
[ 0.961925] Freeing initrd memory: 35692K (ffff880033a3a000 - ffff880035d15000)
[ 0.961961] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.961963] software IO TLB [mem 0xb6abf000-0xbaabf000] (64MB) mapped at [ffff8800b6abf000-ffff8800baabefff]
[ 0.962018] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.962019] hw unit of domain pp0-core 2^-16 Joules
[ 0.962020] hw unit of domain package 2^-16 Joules
[ 0.962020] hw unit of domain pp1-gpu 2^-16 Joules
[ 0.962411] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.962449] audit: initializing netlink subsys (disabled)
[ 0.962464] audit: type=2000 audit(1465525658.952:1): initialized
[ 0.962776] Initialise system trusted keyring
[ 0.962884] zbud: loaded
[ 0.963469] Key type asymmetric registered
[ 0.963473] Asymmetric key parser 'x509' registered
[ 0.963494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.963524] io scheduler noop registered
[ 0.963528] io scheduler deadline registered
[ 0.963541] io scheduler cfq registered (default)
[ 0.963813] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.963819] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.963834] intel_idle: MWAIT substates: 0x21120
[ 0.963835] intel_idle: v0.4.1 model 0x3A
[ 0.963835] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.964000] GHES: HEST is not enabled!
[ 0.964072] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.964516] Linux agpgart interface v0.103
[ 0.964566] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.964567] AMD IOMMUv2 functionality not available on this system
[ 0.964969] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12
[ 0.985856] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.985860] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.986044] mousedev: PS/2 mouse device common for all mice
[ 0.986570] rtc_cmos 00:01: RTC can wake from S4
[ 0.986729] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.986757] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.986769] Intel P-state driver initializing.
[ 0.986943] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.988205] NET: Registered protocol family 10
[ 0.988644] mip6: Mobile IPv6
[ 0.988654] NET: Registered protocol family 17
[ 0.988666] mpls_gso: MPLS GSO support
[ 0.989027] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1c
[ 0.989043] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1c
[ 0.989061] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1c
[ 0.989077] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1c
[ 0.989143] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.989440] registered taskstats version 1
[ 0.989465] Loading compiled-in X.509 certificates
[ 0.990000] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 0.990041] zswap: loaded using pool lzo/zbud
[ 0.990709] rtc_cmos 00:01: setting system clock to 2016-06-10 02:27:39 UTC (1465525659)
[ 0.990861] PM: Hibernation image not present or could not be loaded.
[ 0.992591] Freeing unused kernel memory: 1316K (ffffffff81b14000 - ffffffff81c5d000)
[ 0.992592] Write protecting the kernel read-only data: 10240k
[ 0.992799] Freeing unused kernel memory: 264K (ffff8800015be000 - ffff880001600000)
[ 0.994531] Freeing unused kernel memory: 1168K (ffff8800018dc000 - ffff880001a00000)
[ 0.999562] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.004666] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.010314] random: systemd-udevd urandom read with 4 bits of entropy available
[ 1.023033] video: module verification failed: signature and/or required key missing - tainting kernel
[ 1.026071] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.027083] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3
[ 1.027088] ACPI: Power Button [PWRB]
[ 1.027144] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input4
[ 1.027147] ACPI: Sleep Button [SLPB]
[ 1.027207] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 1.027247] ACPI: Lid Switch [LID0]
[ 1.027298] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 1.027301] ACPI: Power Button [PWRF]
[ 1.033828] [drm] Initialized drm 1.1.0 20060810
[ 1.034352] ACPI: bus type USB registered
[ 1.034434] usbcore: registered new interface driver usbfs
[ 1.034517] usbcore: registered new interface driver hub
[ 1.034721] usbcore: registered new device driver usb
[ 1.037230] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [dc:0e:a1:fa:54:d8]
[ 1.037794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.037860] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.037867] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.037993] ehci-pci: EHCI PCI platform driver
[ 1.038353] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.038355] ACPI: Thermal Zone [TZ00] (59 C)
[ 1.038979] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 1.038985] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.039083] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.039085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.039087] usb usb1: Product: xHCI Host Controller
[ 1.039089] usb usb1: Manufacturer: Linux 4.5.0-1-amd64 xhci-hcd
[ 1.039090] usb usb1: SerialNumber: 0000:00:14.0
[ 1.039231] hub 1-0:1.0: USB hub found
[ 1.039242] hub 1-0:1.0: 4 ports detected
[ 1.039622] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.039626] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.039662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.039664] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.039665] usb usb2: Product: xHCI Host Controller
[ 1.039667] usb usb2: Manufacturer: Linux 4.5.0-1-amd64 xhci-hcd
[ 1.039669] usb usb2: SerialNumber: 0000:00:14.0
[ 1.039777] hub 2-0:1.0: USB hub found
[ 1.039789] hub 2-0:1.0: 4 ports detected
[ 1.040514] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.040521] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.040533] ehci-pci 0000:00:1a.0: debug port 2
[ 1.040681] SCSI subsystem initialized
[ 1.042481] libata version 3.00 loaded.
[ 1.044454] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.044757] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd0619000
[ 1.056300] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.056392] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.056393] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.056394] usb usb3: Product: EHCI Host Controller
[ 1.056395] usb usb3: Manufacturer: Linux 4.5.0-1-amd64 ehci_hcd
[ 1.056396] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.056495] hub 3-0:1.0: USB hub found
[ 1.056499] hub 3-0:1.0: 2 ports detected
[ 1.056678] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.056682] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.056693] ehci-pci 0000:00:1d.0: debug port 2
[ 1.060591] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.060982] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0618000
[ 1.072292] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.072374] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.072375] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.072376] usb usb4: Product: EHCI Host Controller
[ 1.072377] usb usb4: Manufacturer: Linux 4.5.0-1-amd64 ehci_hcd
[ 1.072378] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.072602] hub 4-0:1.0: USB hub found
[ 1.072608] hub 4-0:1.0: 2 ports detected
[ 1.072706] ahci 0000:00:1f.2: version 3.0
[ 1.072842] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.082954] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.082961] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 1.089037] scsi host0: ahci
[ 1.089207] scsi host1: ahci
[ 1.089360] scsi host2: ahci
[ 1.089484] scsi host3: ahci
[ 1.089600] scsi host4: ahci
[ 1.089731] scsi host5: ahci
[ 1.089786] ata1: SATA max UDMA/133 abar m2048@0xd0617000 port 0xd0617100 irq 27
[ 1.089789] ata2: DUMMY
[ 1.089791] ata3: SATA max UDMA/133 abar m2048@0xd0617000 port 0xd0617200 irq 27
[ 1.089793] ata4: DUMMY
[ 1.089794] ata5: DUMMY
[ 1.089795] ata6: DUMMY
[ 1.092197] [drm] Memory usable by graphics device = 2048M
[ 1.092199] [drm] Replacing VGA console driver
[ 1.092725] Console: switching to colour dummy device 80x25
[ 1.098356] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.098357] [drm] Driver supports precise vblank timestamp query.
[ 1.098605] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.118729] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.118843] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input8
[ 1.118864] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
[ 1.257245] fbcon: inteldrmfb (fb0) is primary device
[ 1.368372] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.384357] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.399953] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.400821] ata1.00: READ LOG DMA EXT failed, trying unqueued
[ 1.400861] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.400863] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
[ 1.400865] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.401132] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.401138] ata1.00: configured for UDMA/133
[ 1.402745] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5
[ 1.502089] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.502091] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.502509] hub 3-1:1.0: USB hub found
[ 1.502930] hub 3-1:1.0: 6 ports detected
[ 1.516738] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.516741] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.517138] hub 4-1:1.0: USB hub found
[ 1.517317] hub 4-1:1.0: 6 ports detected
[ 1.735770] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.738991] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 1.739872] ata3.00: configured for UDMA/100
[ 1.748141] scsi 2:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 1.772354] usb 3-1.2: new full-speed USB device number 3 using ehci-pci
[ 1.788361] usb 4-1.6: new high-speed USB device number 3 using ehci-pci
[ 1.867860] usb 3-1.2: New USB device found, idVendor=046d, idProduct=c52f
[ 1.867863] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.867865] usb 3-1.2: Product: USB Receiver
[ 1.867866] usb 3-1.2: Manufacturer: Logitech
[ 1.871357] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.874861] usbcore: registered new interface driver usbhid
[ 1.874862] usbhid: USB HID core driver
[ 1.875968] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:046D:C52F.0001/input/input9
[ 1.876086] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
[ 1.877090] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:046D:C52F.0002/input/input10
[ 1.889345] usb 4-1.6: New USB device found, idVendor=5986, idProduct=0295
[ 1.889347] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.889349] usb 4-1.6: Product: Lenovo EasyCamera
[ 1.889350] usb 4-1.6: Manufacturer: Vimicro corp.
[ 1.932663] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1
[ 1.944357] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 1.960329] tsc: Refined TSC clocksource calibration: 2893.430 MHz
[ 1.960332] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b5049ca8c, max_idle_ns: 440795222133 ns
[ 2.016353] usb 3-1.3: device descriptor read/64, error -32
[ 2.084599] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f02)
[ 2.108865] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[ 2.134782] psmouse serio1: elantech: Elan sample query result 03, 3d, 85
[ 2.213480] usb 3-1.3: New USB device found, idVendor=0cf3, idProduct=3005
[ 2.213483] usb 3-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.254700] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[ 2.284346] usb 3-1.4: new high-speed USB device number 5 using ehci-pci
[ 2.377171] usb 3-1.4: New USB device found, idVendor=0bda, idProduct=0129
[ 2.377174] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.377176] usb 3-1.4: Product: USB2.0-CRW
[ 2.377178] usb 3-1.4: Manufacturer: Generic
[ 2.377179] usb 3-1.4: SerialNumber: 20100201396000000
[ 2.380421] Console: switching to colour frame buffer device 200x56
[ 2.382371] usbcore: registered new interface driver rtsx_usb
[ 2.386548] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.400036] ata1.00: Enabling discard_zeroes_data
[ 2.400057] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 2.400290] sd 0:0:0:0: [sda] Write Protect is off
[ 2.400295] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.400317] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.400539] ata1.00: Enabling discard_zeroes_data
[ 2.401221] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 2.401665] ata1.00: Enabling discard_zeroes_data
[ 2.401762] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.414018] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.414024] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.414179] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.934805] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 2.960287] clocksource: Switched to clocksource tsc
[ 2.980379] systemd[1]: RTC configured in localtime, applying delta of -600 minutes to system time.
[ 2.990788] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 2.990951] systemd[1]: Detected architecture x86-64.
[ 2.991088] systemd[1]: Set hostname to <sparky>.
[ 3.042640] systemd[1]: Listening on udev Control Socket.
[ 3.042691] systemd[1]: Reached target User and Group Name Lookups.
[ 3.042719] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.042748] systemd[1]: Listening on Journal Socket.
[ 3.042852] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.042955] systemd[1]: Created slice User and Session Slice.
[ 3.042977] systemd[1]: Listening on Syslog Socket.
[ 3.042995] systemd[1]: Listening on udev Kernel Socket.
[ 3.043073] systemd[1]: Created slice System Slice.
[ 3.060342] systemd[1]: Mounting Debug File System...
[ 3.061615] systemd[1]: Starting Load Kernel Modules...
[ 3.061646] systemd[1]: Reached target Slices.
[ 3.062147] systemd[1]: Mounting Huge Pages File System...
[ 3.062217] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.062293] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.062333] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.062828] systemd[1]: Starting Set the console keyboard layout...
[ 3.063335] systemd[1]: Starting Uncomplicated firewall...
[ 3.063695] systemd[1]: Reached target Encrypted Volumes.
[ 3.064262] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.064366] systemd[1]: Listening on Journal Audit Socket.
[ 3.064890] systemd[1]: Starting Journal Service...
[ 3.065422] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.066117] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.066138] systemd[1]: Reached target Remote File Systems (Pre).
[ 3.066166] systemd[1]: Reached target Remote File Systems.
[ 3.067878] systemd[1]: Mounted Debug File System.
[ 3.067962] systemd[1]: Mounted Huge Pages File System.
[ 3.068424] systemd[1]: Started Uncomplicated firewall.
[ 3.070007] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.070799] lp: driver loaded but no devices found
[ 3.070976] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.072530] ppdev: user-space parallel port driver
[ 3.076515] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 3.078282] systemd[1]: Started Remount Root and Kernel File Systems.
[ 3.083459] Key type encrypted registered
[ 3.086788] loop: module loaded
[ 3.087373] systemd[1]: Started Load Kernel Modules.
[ 3.096205] systemd[1]: Started Journal Service.
[ 3.139455] systemd-journald[205]: Received request to flush runtime journal from PID 1
[ 3.240964] ACPI: AC Adapter [ACAD] (on-line)
[ 3.247607] wmi: Mapper loaded
[ 3.288652] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.289369] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160108/utaddress-255)
[ 3.289376] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.289383] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[ 3.289388] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.289389] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[ 3.289392] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.289393] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[ 3.289396] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.289397] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.289682] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.290236] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.290701] media: Linux media interface: v0.10
[ 3.291329] Bluetooth: Core ver 2.21
[ 3.291341] NET: Registered protocol family 31
[ 3.291342] Bluetooth: HCI device and connection manager initialized
[ 3.291345] Bluetooth: HCI socket layer initialized
[ 3.291348] Bluetooth: L2CAP socket layer initialized
[ 3.291353] Bluetooth: SCO socket layer initialized
[ 3.294200] Linux video capture interface: v2.00
[ 3.295053] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input11
[ 3.296734] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305F conflicts with OpRegion 0x0000000000003040-0x000000000000304F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
[ 3.296740] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.296996] usbcore: registered new interface driver btusb
[ 3.300161] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0295)
[ 3.300982] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 3.301267] uvcvideo 4-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.301271] uvcvideo 4-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.301273] uvcvideo 4-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.301655] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input13
[ 3.301829] usbcore: registered new interface driver uvcvideo
[ 3.301831] USB Video Class driver (1.1.1)
[ 3.320416] AVX version of gcm_enc/dec engaged.
[ 3.320418] AES CTR mode by8 optimization enabled
[ 3.320580] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[ 3.321018] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 3.321020] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.321022] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[ 3.321023] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 3.321025] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 3.321027] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1b
[ 3.321028] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1a
[ 3.322098] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 3.333836] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 3.370772] intel_rapl: Found RAPL domain package
[ 3.370775] intel_rapl: Found RAPL domain core
[ 3.370777] intel_rapl: Found RAPL domain uncore
[ 3.370782] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 3.372226] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 3.372542] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 3.372602] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 3.372659] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 3.374790] ath: phy0: ASPM enabled: 0x42
[ 3.374792] ath: EEPROM regdomain: 0x65
[ 3.374793] ath: EEPROM indicates we should expect a direct regpair map
[ 3.374795] ath: Country alpha2 being used: 00
[ 3.374795] ath: Regpair used: 0x65
[ 3.378613] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.378837] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000f20000, irq=17
[ 3.393322] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 3.394326] Adding 1665020k swap on /dev/sda7. Priority:-1 extents:1 across:1665020k SSFS
[ 3.406402] iTCO_vendor_support: vendor-support=0
[ 3.406769] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.406802] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.407427] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.480263] ACPI: Battery Slot [BAT1] (battery present)
[ 3.738621] random: nonblocking pool is initialized
[ 3.760477] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.760480] Bluetooth: BNEP filters: protocol multicast
[ 3.760484] Bluetooth: BNEP socket layer initialized
[ 3.883084] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.897988] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.906332] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.908490] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.004802] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.357725] fuse init (API version 7.24)
[ 31.367348] QXcbEventReader[1632]: segfault at 7fd1774f1789 ip 00007fd1774f1789 sp 00007fd1759bfd20 error 14 in locale-archive[7fd1775a1000+18e000]
[ 32.044928] Bluetooth: RFCOMM TTY layer initialized
[ 32.044936] Bluetooth: RFCOMM socket layer initialized
[ 32.044941] Bluetooth: RFCOMM ver 1.11
[ 170.595423] alx 0000:01:00.0 eth0: NIC Up: 100 Mbps Full
[ 170.596099] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 924.444034] alx 0000:01:00.0 eth0: Link Down
[ 926.429871] alx 0000:01:00.0 eth0: NIC Up: 100 Mbps Full
[ 942.052520] alx 0000:01:00.0 eth0: Link Down
[ 943.870001] alx 0000:01:00.0 eth0: NIC Up: 100 Mbps Full
[ 1474.584848] alx 0000:01:00.0 eth0: Link Down
[ 1492.557696] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 1492.573514] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 1492.575235] wlan0: authenticated
[ 1492.577545] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[ 1492.585475] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[ 1492.585617] wlan0: associated
[ 1492.585744] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2031.512902] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2038.019302] systemd[1]: apt-daily.timer: Adding 4h 33min 59.073477s random time.
[ 2038.097591] systemd[1]: apt-daily.timer: Adding 4h 5min 9.100571s random time.
[ 2038.162019] systemd[1]: apt-daily.timer: Adding 33min 49.141716s random time.
[ 2042.791538] systemd[1]: apt-daily.timer: Adding 10h 4min 37.540644s random time.
[ 2045.742852] systemd[1]: apt-daily.timer: Adding 8h 2min 34.732966s random time.
[ 2046.864872] systemd[1]: apt-daily.timer: Adding 6h 29min 36.251649s random time.
[ 2047.181295] systemd[1]: apt-daily.timer: Adding 26min 30.569388s random time.
[ 2051.749225] systemd[1]: apt-daily.timer: Adding 47min 4.325180s random time.
[ 2051.796563] systemd[1]: apt-daily.timer: Adding 7h 54min 17.674091s random time.
[ 2051.839144] systemd[1]: apt-daily.timer: Adding 9h 57min 23.374742s random time.
[ 2058.439007] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 2058.452088] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 2058.455115] wlan0: authenticated
[ 2058.457957] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[ 2058.460591] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[ 2058.460694] wlan0: associated
[ 2058.460729] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2445.615953] wlan0: deauthenticating from 10:0d:7f:76:a6:67 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2445.728338] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2445.729311] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2445.735349] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2445.804384] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2446.763982] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 2446.777148] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 2446.778836] wlan0: authenticated
[ 2446.779616] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[ 2446.782179] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[ 2446.782289] wlan0: associated
[ 2446.782315] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2469.948855] device-mapper: uevent: version 1.0.3
[ 2469.948967] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 2471.276976] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 2471.278740] JFS: nTxBlock = 8192, nTxLock = 65536
[ 2471.285332] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 2471.291534] QNX4 filesystem 0.2.3 registered.
[ 2471.362209] raid6: sse2x1 gen() 9673 MB/s
[ 2471.430222] raid6: sse2x1 xor() 7610 MB/s
[ 2471.498234] raid6: sse2x2 gen() 12209 MB/s
[ 2471.566248] raid6: sse2x2 xor() 8679 MB/s
[ 2471.634261] raid6: sse2x4 gen() 14311 MB/s
[ 2471.702273] raid6: sse2x4 xor() 10590 MB/s
[ 2471.702274] raid6: using algorithm sse2x4 gen() 14311 MB/s
[ 2471.702275] raid6: .... xor() 10590 MB/s, rmw enabled
[ 2471.702276] raid6: using ssse3x2 recovery algorithm
[ 2471.702596] xor: automatically using best checksumming function:
[ 2471.742279] avx : 26142.000 MB/sec
[ 2471.744951] Btrfs loaded
[ 2471.916284] EXT4-fs (sda2): unable to read superblock
[ 2471.917420] EXT4-fs (sda2): unable to read superblock
[ 2471.918544] EXT4-fs (sda2): unable to read superblock
[ 2471.922302] XFS (sda2): Invalid superblock magic number
[ 2471.925960] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 2471.926089] FAT-fs (sda2): bogus number of reserved sectors
[ 2471.926091] FAT-fs (sda2): Can't find a valid FAT filesystem
[ 2471.927013] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 2471.927137] FAT-fs (sda2): bogus number of reserved sectors
[ 2471.927139] FAT-fs (sda2): Can't find a valid FAT filesystem
[ 2471.929949] MINIX-fs: unable to read superblock
[ 2471.932110] attempt to access beyond end of device
[ 2471.932114] sda2: rw=16, want=3, limit=2
[ 2471.932116] hfsplus: unable to find HFS+ superblock
[ 2471.933282] qnx4: no qnx4 filesystem (no root dir).
[ 2471.934206] ufs: You didn't specify the type of your ufs filesystem

mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...

>>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[ 2471.936102] hfs: can't find a HFS filesystem on dev sda2
[ 3106.257219] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 3106.274868] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 3106.364487] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
[ 3106.437078] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
[ 3106.509706] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
[ 3120.463037] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3147.451169] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 3147.464368] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 3147.466165] wlan0: authenticated
[ 3147.468977] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[ 3147.471554] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[ 3147.471680] wlan0: associated
[ 3147.471715] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4196.230332] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 4196.249115] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 4196.318788] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
[ 4196.366397] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
[ 4196.424664] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
[ 4210.454838] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4237.418938] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 4237.432111] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 4237.434325] wlan0: authenticated
[ 4237.436636] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[ 4237.439206] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[ 4237.439322] wlan0: associated
[ 4237.439357] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5286.215280] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 5286.234572] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 5286.309450] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
[ 5286.394502] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
[ 5286.494775] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
[ 5300.439033] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5327.345297] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 5327.358289] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 5327.362390] wlan0: authenticated
[ 5327.366225] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[ 5327.369018] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[ 5327.369144] wlan0: associated
[ 5327.369172] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6376.172609] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 6376.185810] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 6376.220092] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
[ 6376.275346] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
[ 6376.333866] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
[ 6390.403430] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6417.344217] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 6417.357302] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 6417.362785] wlan0: authenticated
[ 6417.365926] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[ 6417.373046] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[ 6417.373158] wlan0: associated
[ 6417.373202] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 7466.169890] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 7466.186987] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 7466.288239] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
[ 7466.352640] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
[ 7466.440055] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
[ 7480.385256] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7507.305882] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 7507.319028] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 7507.324930] wlan0: authenticated
[ 7507.327747] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[ 7507.330309] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[ 7507.330414] wlan0: associated
[ 7507.330449] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8569.346906] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8596.278584] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 8596.291682] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 8596.293873] wlan0: authenticated
[ 8596.295132] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[ 8596.299119] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[ 8596.299223] wlan0: associated
[ 8596.299262] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 9645.076250] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 9645.093751] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 9645.189890] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
[ 9645.213941] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
[ 9645.341682] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
[ 9659.302138] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9686.235130] wlan0: authenticate with 10:0d:7f:76:a6:67
[ 9686.248180] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[ 9686.250765] wlan0: authenticated
[ 9686.252108] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[ 9686.254659] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[ 9686.254756] wlan0: associated
[ 9686.254791] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[10748.267384] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10775.223977] wlan0: authenticate with 10:0d:7f:76:a6:67
[10775.237013] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[10775.239093] wlan0: authenticated
[10775.240489] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[10775.243146] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[10775.243246] wlan0: associated
[10775.243279] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[11477.877007] perf interrupt took too long (2608 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[11837.216207] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[11864.193099] wlan0: authenticate with 10:0d:7f:76:a6:67
[11864.206216] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[11864.210320] wlan0: authenticated
[11864.211426] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[11864.219635] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[11864.219752] wlan0: associated
[11864.219791] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[12912.941968] wlan0: authenticate with 10:0d:7f:76:a6:67
[12912.958029] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[12913.039143] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
[12913.125706] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
[12913.203428] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
[12927.164185] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12954.155563] wlan0: authenticate with 10:0d:7f:76:a6:67
[12954.168589] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[12954.176984] wlan0: authenticated
[12954.180268] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[12954.182989] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[12954.183111] wlan0: associated
[12954.183139] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[14002.898147] wlan0: authenticate with 10:0d:7f:76:a6:67
[14002.913380] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[14002.984581] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
[14003.077902] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
[14003.150315] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
[14017.118604] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14044.073524] wlan0: authenticate with 10:0d:7f:76:a6:67
[14044.086585] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[14044.090624] wlan0: authenticated
[14044.091720] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[14044.094354] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[14044.094454] wlan0: associated
[14044.094487] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15106.080947] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15133.052927] wlan0: authenticate with 10:0d:7f:76:a6:67
[15133.066008] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[15133.067700] wlan0: authenticated
[15133.067891] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[15133.070554] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[15133.070658] wlan0: associated
[15133.070703] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[16181.832455] wlan0: authenticate with 10:0d:7f:76:a6:67
[16181.848424] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[16181.907397] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
[16181.985926] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
[16182.059138] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
[16196.040158] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16222.999370] wlan0: authenticate with 10:0d:7f:76:a6:67
[16223.012496] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[16223.014327] wlan0: authenticated
[16223.018167] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[16223.020751] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[16223.020866] wlan0: associated
[16223.020911] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17285.009919] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17311.985415] wlan0: authenticate with 10:0d:7f:76:a6:67
[17311.998610] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[17312.002872] wlan0: authenticated
[17312.004664] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[17312.010259] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[17312.010375] wlan0: associated
[17312.010436] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[18373.967041] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18400.949094] wlan0: authenticate with 10:0d:7f:76:a6:67
[18400.962140] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[18400.968466] wlan0: authenticated
[18400.970496] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[18400.973048] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[18400.973151] wlan0: associated
[18400.973196] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[19462.925513] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19489.908917] wlan0: authenticate with 10:0d:7f:76:a6:67
[19489.922302] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[19489.926206] wlan0: authenticated
[19489.928089] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[19489.930644] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[19489.930750] wlan0: associated
[19489.930790] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[20538.676945] wlan0: authenticate with 10:0d:7f:76:a6:67
[20538.695925] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[20538.801318] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
[20538.882466] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
[20538.943496] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
[20552.882165] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[20579.847902] wlan0: authenticate with 10:0d:7f:76:a6:67
[20579.861170] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[20579.865339] wlan0: authenticated
[20579.865978] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[20579.868562] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[20579.868664] wlan0: associated
[20579.868696] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[21641.845227] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[21668.763537] wlan0: authenticate with 10:0d:7f:76:a6:67
[21668.776571] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[21668.778273] wlan0: authenticated
[21668.779490] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[21668.782203] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[21668.782305] wlan0: associated
[21668.782372] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[22730.799376] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[22757.784752] wlan0: authenticate with 10:0d:7f:76:a6:67
[22757.797835] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[22757.799533] wlan0: authenticated
[22757.800240] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[22757.802813] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[22757.802924] wlan0: associated
[22757.802963] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[23819.755764] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23846.717963] wlan0: authenticate with 10:0d:7f:76:a6:67
[23846.731083] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[23846.734587] wlan0: authenticated
[23846.737406] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[23846.744538] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[23846.744652] wlan0: associated
[23846.744706] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[24895.476023] wlan0: authenticate with 10:0d:7f:76:a6:67
[24895.491849] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[24895.558159] wlan0: send auth to 10:0d:7f:76:a6:67 (try 2/3)
[24895.624171] wlan0: send auth to 10:0d:7f:76:a6:67 (try 3/3)
[24895.710139] wlan0: authentication with 10:0d:7f:76:a6:67 timed out
[24909.711674] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[24936.683357] wlan0: authenticate with 10:0d:7f:76:a6:67
[24936.696477] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[24936.698344] wlan0: authenticated
[24936.702320] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[24936.705821] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[24936.705927] wlan0: associated
[24936.705973] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[25082.475164] wlan0: deauthenticating from 10:0d:7f:76:a6:67 by local choice (Reason: 3=DEAUTH_LEAVING)
[25101.792034] alx 0000:01:00.0 eth0: NIC Up: 100 Mbps Full
[25101.792405] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[25302.876399] alx 0000:01:00.0 eth0: Link Down
[25312.597689] wlan0: authenticate with 10:0d:7f:76:a6:67
[25312.615303] wlan0: send auth to 10:0d:7f:76:a6:67 (try 1/3)
[25312.617016] wlan0: authenticated
[25312.619963] wlan0: associate with 10:0d:7f:76:a6:67 (try 1/3)
[25312.623307] wlan0: RX AssocResp from 10:0d:7f:76:a6:67 (capab=0x411 status=0 aid=1)
[25312.623409] wlan0: associated
[25323.243228] usb 3-1.4: reset high-speed USB device number 5 using ehci-pci
[25441.261684] wlan0: deauthenticating from 10:0d:7f:76:a6:67 by local choice (Reason: 3=DEAUTH_LEAVING)
[25458.134136] alx 0000:01:00.0 eth0: NIC Up: 100 Mbps Full

pavroo · June 10, 2016, 08:10:08 PM

Your wireled device uses alx driver (Qualcomm Atheros AR8162 Fast Ethernet) and it is fully supported, installed and in use.

QuoteThe non working cable seems to be a problem in most distros I try.

Are you sure is your device not broken?

If not, here is a solution:
https://forums.kali.org/showthread.php?960-How-to-install-Atheros-AR8162-Ethernet-drivers

vectoravtech · June 13, 2016, 01:29:01 AM

It turns out I did reflash my N600 Netgear with a version with heartbleed protection and the internet works fine now. Please delete this post. Sparky works great! :D I even setup Slim Samba 2 on a usb stick. I also need to buy a crimping set so I can make my own cables as well.

[gallery]

[/gallery]